Noel (and anyone else . . .),
Thank you very, very much for offering to probe a bit into my problem.
I think I have a solution but I don't understand it. Without the solution, here is what I see in the spool log w/ DEBUG:
On the sending machine: --The e-mail is sent. The log goes quiet.
On the receiving machine: --Nothing. --Then some 15 seconds later, the mail comes in.
Now here's the thing:
I am running a DNS server on .10. On all machines, the primary DNS is given as this machine. I also have a couple of external DNS's listed, but typically the router is unplugged from the outside internet.
First, in the James config.xml, I changed the DNS listing (to 192.168.50.10) to authoritative=true. This seemed to make no difference.
Then--and this is the interesting bit--I removed the two external DNS servers. Now there's no delay.
Also, when I *did* have the two external secondary DNS servers, if I plugged my router in so that those two were reachable: No delay.
So . . . Why would the reachability of non-authoritative secondary DNS make a difference either way?
John
At 12:36 AM 3/25/2005 -0500, Noel J. Bergman wrote:
> I'm stumped. Also not 100% sure of what log should show me > what the problem is
Turn on debug for the spoolmanager, and check to see if there are any delays between steps.
--- Noel
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
