Hi Yang,
I don't think the problem is within the SF/sfc-agent, because as you can
see in the pcap file, the SFF always sends to SF's 6633 port, no matter
which port the SF is listening to. I tried to change all 6633 ports in
the configuration file to 6666 and it worked, but if I only change SF's
configuration it didn't.
Regards,
On 11/7/16 11:25 AM, Yang, Yi Y wrote:
Hi, Victor
Try this one patch.
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *VictorVu
*Sent:* Sunday, November 6, 2016 12:38 PM
*To:* Brady Johnson <[email protected]>
*Cc:* sfc-dev opendaylight <[email protected]>
*Subject:* Re: [sfc-dev] SF dataplane set port bug
Hi,
Sorry for the delayed response. I reproduced the sfc103 demo for
testing. This is the config file:
https://dl.dropboxusercontent.com/u/43016963/ODL%20shared%20config/setup_sfc.py
The dumpflow of sff1:
https://dl.dropboxusercontent.com/u/43016963/ODL%20shared%20config/sff1%20dumpflow.txt
sudo ovs-vsctl show
06321d10-c7b5-47ea-8b5f-48c034a843cb
Manager "tcp:192.168.1.5:6640"
is_connected: true
Bridge br-sfc
Controller "tcp:192.168.1.5:6653"
is_connected: true
Port br-sfc
Interface br-sfc
type: internal
Port "sff1-dpl"
Interface "sff1-dpl"
type: vxlan
options: {dst_port="6633", exts=gpe, key=flow,
"nshc1"=flow, "nshc2"=flow, "nshc3"=flow, "nshc4"=flow, nsi=flow,
nsp=flow, remote_ip=flow}
ovs_version: "2.5.90"
I'm not quite understand the meaning of the above option "dst_port".
And this is the packet capturing results:
https://dl.dropboxusercontent.com/u/43016963/ODL%20shared%20config/mycap.pcap
Thank you very much,
Victor
On 11/6/16 3:05 AM, Brady Johnson wrote:
Victor,
Could you also send us the sff configuration, a dump of the flows,
and the result of the following command:
sudo ovs-vsctl show
Thanks,
Brady
On Nov 5, 2016 18:48, "VictorVu" <[email protected]
<mailto:[email protected]>> wrote:
Hi Brady,
I have just tried the master branch (commit
f65065b19516a750b73262c63ba269fca2365e23), still the same
problem. The configuration is like this:
"service-function": [
{
"ip-mgmt-address": "170.10.0.5",
"name": "dpi-1",
"nsh-aware": "true",
"rest-uri": "http://170.10.0.5:5000";
<http://170.10.0.5:5000>,
"sf-data-plane-locator": [
{
"ip": "170.10.0.5",
"name": "dpi-1-dpl",
"port": 6666,
"service-function-forwarder": "SFF1",
"transport": "service-locator:vxlan-gpe"
}
],
"type": "dpi"
},
Thank you,
Victor
On 11/6/16 2:32 AM, Brady Johnson wrote:
Victor,
What version of odl are you using?
Thanks,
Brady
On Nov 5, 2016 18:15, "VictorVu" <[email protected]
<mailto:[email protected]>> wrote:
Hi.
Recently I have tried to set SF dataplane locator port
to other values than 6633 and it did not work. SFFs
still send packet to port 6633 of the SF ip address.
Has anyone encountered this problem? Is it a bug in
current version?
Best regards.
Victor
_______________________________________________
sfc-dev mailing list
[email protected]
<mailto:[email protected]>
https://lists.opendaylight.org/mailman/listinfo/sfc-dev
_______________________________________________
sfc-dev mailing list
[email protected]
https://lists.opendaylight.org/mailman/listinfo/sfc-dev
