On Tue, 2011-09-13 at 08:38 -0400, seth wrote:
> i think that this is the "pulseaudio way". the app just forwards the
> data on to pa and then the routing is handled by pa. i use the pama,
> the "PulseAudio Mixer Applet" for gnome, and am very happy with it.
> eg, you can switch a call from the headset to the main speakers live
> during a call. i believe that this remembers settings properly (not
> sure if this is a feature of pama or pa in general)
> 
> 
> though i agree that the initial setup of the routings is a pain. with
> pama, you can only change the routings while the audio event is live.
> i'm guessing that there's a manual way to do it with pa, but in either
> case it's a pain
> 
Yes - it's the same way with the native padev chooser.  The sound stream
must be active and there seems to be no way to remember it.  That's a
real problem as lots of office will not want the speaker phone on by
default so to speak.

So no one knows of a way to set the defaults permanently? Thanks - John
> 
> 
> On Tue, Sep 13, 2011 at 1:40 AM, John A. Sullivan III
> <[email protected]> wrote:
>         Hello, all.  Sorry for all the noise on the list but I must
>         just not be
>         getting the SFL way of doing things :(  I'm using pulseaudio.
>          It looks
>         like there is no way to choose the output audio device from
>         inside of
>         SFLPhone.  I started the volume manager and, when a call came
>         in, I
>         changed the rington to the PC speakers and left the call audio
>         on the
>         headset.  That was fine and we could live with that as a first
>         time
>         setup although it is really awkward for our potential end
>         users.
>         
>         I then received another call and SFL/Pulse completely forgot
>         its
>         settings.  The ringtone was on the headset again.  How does
>         one get it
>         to "stick"?, i.e., how does one permanently configure SFLPhone
>         to use
>         the PC speakers for ringtone and the headset for the call
>         audio? Thanks
>         - John
>         
>         _______________________________________________
>         SFLphone mailing list
>         [email protected]
>         http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
> 


_______________________________________________
SFLphone mailing list
[email protected]
http://lists.savoirfairelinux.net/mailman/listinfo/sflphone

Reply via email to