ok, if sipsak, the sip swiss arm knife, can connect, then sflphone
should, too, right?
thufir@doge:~$
thufir@doge:~$ sudo sipsak -vv -s sip:thufir101@tleilax
No SRV record: _sip._tcp.tleilax
No SRV record: _sip._udp.tleilax
using A record: tleilax
message received:
SIP/2.0 200 OK
CSeq: 1 OPTIONS
Via: SIP/2.0/UDP
127.0.1.1:60288;branch=z9hG4bK.448994d7;rport=60288;alias;received=192.168.1.3
User-Agent: Ekiga/4.0.1
From: sip:[email protected]:60288;tag=14da5733
Call-ID: [email protected]
To: sip:thufir101@tleilax
Contact: <sip:[email protected]>
Content-Length: 0
** reply received after 3.020 ms **
SIP/2.0 200 OK
final received
thufir@doge:~$
thufir@doge:~$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 doge.bounceme.net doge
192.168.1.3 tleilax.bounceme.net tleilax
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
thufir@doge:~$
However, when I put those parameters into sflphone, I don't get a 200
success, I still get "no registered accounts."
doesn't the above confirm that the user is there, and so forth? I've
confirmed the password through the asterisk console.
thanks,
Thufir
_______________________________________________
SFLphone mailing list
[email protected]
http://lists.savoirfairelinux.net/mailman/listinfo/sflphone
