Sebastian Reitenbach wrote:
On Tuesday 15 June 2010 08:41:30 pm Jasper Lievisse Adriaanse wrote:
On Tue, Jun 15, 2010 at 06:09:24PM +0000, Miod Vallat wrote:
Hi,
some days ago, I received two QLogic ISP2200, and today I got a HSSDC
cable to actually make use of my harddrives in my origin 3000. When I
try to install, at the stage of downloading base47.tar.gz, at some
point between 60% and 90% the installation stalls, and I see lots of
the messages below:
base47.tgz 82% |****************************** | 45934 KB -
stalled -isp0: possible command timeout on handle 2b6
isp0: possible command timeout on handle 2b7
isp0: possible command timeout on handle 2b8
...
many more of those
Sigh. I believe this is caused by a xbridge(4) bug wrt DMA, but I can't
find it. And I have not been able to reproduce this problem in ages (and
I have only seen it on IP35 class systems).
Miod
I've run into this some time ago on an O350, but this hasn't shown up
recently there..
Miod gave me some hints what I can try offlist. I'll report back here when I'm
done with it.
I reinstalled a snapshot on the USB disk, and mounted the FC disks
somewhere, but extracting base47.tgz revealed the problem too. Then I
moved the qlogic card from a 66MHz pci slot to a 33MHzpci slot on the
I-Brick (Bus 1/Slot 1) which is intended only for 33MHz cards. However,
the problem persists, same error messages.
I'm checking out /src/sys now and try to build the kernel with the
changes miod suggested to me tomorrow.
cheers,
Sebastian
