> I've been a member of this list for quite a while now and there have
> been many good discussions regarding the need for speed.
>
> I am currently running a 486 DX2-66 STN Router. This machine is
> however, dieing. I have a 486 25SX that is Y2K compliant and is
> reliable and I also have a P-90 that I can replace my old STN box
> with.
>
> What I would like to know is:
>
> How much performance difference is there between a 486 SX25 and a P-90
> when routing off of a T1 or a Cable Modem? I was completely happy
> with the performance of my 486 DX2-66 in this capacity, but will the
> 486 SX25 be able to perform the same or should I use the P-90. I do
> not want to use the P-90 unless there will be a significant sacrifice
> in performance by using the 486 25SX.
I had a 486dx2 66 running my server, and I needed to use the chip
elsewhere, so I replaced it with a 25. I've suffered to ill effects
from it (it boots a little slower, but it's been up for a few months
straight, so it matters not). Hope that helps!
,;;
,;;' Jeff Simpson
, ,;;' [EMAIL PROTECTED]
';;' ICQ: 15742956
.' ', http://www.psouth.net/~7lc
--
Visit http://www.ShareTheNet.com for info about ShareTheNet
Visit http://www.topica.com/lists/sharethenet for info about this list
_____________________________________________________________
You share a similar passion. You align with common interests.
You connect over a favorite topic. You belong at Topica.
http://www.topica.com/t/10
