I have the very same card in my gateway. What you need to do my friend is disable plug and play on the card. To do this : 1. find the disk that came with your NIC. 2. stick a Dos or WIN bootdisk in your gateway and boot off it. 2. put the NIC disk in. (duh i know) 4. CD to the UTLITIES dir. 5. run SETUP (or DIAG works too). 6. disable plug and play. 7. set the settings and save it to the EPROM by pressing F10 (i think). 8. reboot and setup your router to match the new settings. hope that helps... if not check your BIOS and make sure you disable Plug and Play there. I had to do that to let Linux load up on one of my computers... --Jonathan ____________________________________________________________________ Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com. -- Visit http://www.ShareTheNet.com for info about ShareTheNet Visit http://www.topica.com/lists/sharethenet for info about this list ______________________________________________ Faster, stronger and able to send millions of emails in one click: the new Topica site! http://www.topica.com/t/14
