I'm trying to setup a muli speed internal network. One subnet is going to
be 10mb and the other will be 100mb. I'm using an SCO Openserver 5.04
machine as a gateway between the two. I can ping ip's from one subnet to
the other, but am unable to get out on the Internet on the subnet the
sharethenet box is not connected to. From my experience with LRP it's
probably a routing setup or an ipfwadm setting needs to be added to include
the other subnet. The SCO box is doing IPforwarding and IPsend redirects
but is not doing NAT. I'll draw a diagram to explain further. The
Pipeline 25px I have does NAT, but it will only send data to one ip address
at a time, and won't send to a different ip until you reset it. Ascend
says this is correct because the px stands for personal edition. That's
why I have to use STN.
diagram.jpg
diagram.jpg