Hi Benjamin,
Please see http://www.sharethenet.com/faq.html#networking-routing
Don't worry, it didn't exist before you asked the question :)
HTH
[EMAIL PROTECTED]
>
> I'm trying to setup a muli speed internal network. One
> subnet is going to
> be 10mb and the other will be 100mb. I'm using an SCO Openserver 5.04
> machine as a gateway between the two. I can ping ip's from one subnet to
> the other, but am unable to get out on the Internet on the subnet the
> sharethenet box is not connected to. From my experience with LRP it's
> probably a routing setup or an ipfwadm setting needs to be added
> to include
> the other subnet. The SCO box is doing IPforwarding and IPsend redirects
> but is not doing NAT. I'll draw a diagram to explain further. The
> Pipeline 25px I have does NAT, but it will only send data to one
> ip address
> at a time, and won't send to a different ip until you reset it. Ascend
> says this is correct because the px stands for personal edition. That's
> why I have to use STN.
>
>
_______________________________________________
ShareTheNet maillist - [EMAIL PROTECTED]
http://www.webserv.com/mailman/listinfo/sharethenet
