I'm on Columbus RR.....
> John,
> Thank you for you quick response.
>
> I tried leaving the hostname blank as you suggested, but S50dhcpcd is
> still hanging forever (over 15 minutes).
All my DHCP fields are blank...and it works. Its been my experience that if
you don't get an IP address after the point where it starts counting up, then
your probably not going to and have to reboot to try again.
> I don't see any TX/RX activity on either card's LED. Should there be
> any?
I think you should see activity on the external interface. You should also
see activity on the cable modem.
> Both cards show up during the NIC initialization. I have an ISA DE202
> and a PCI SMC using the Tulip driver.
Does it show up correctly? I had a problem with an ISA card where STN found
it, but it turned out that I needed to run the card's setup program to turn on
its NE2k emulation mode.
> - If I needed a RoadRunner logon (which I don't think I need) would
> it happen during the dhcpcd initialization, giving me the symptom I
> currently have?
The RoadRunner logon takes place after DHCP....you need an IP address to
logon.
> - Has anyone got STN to work with Cincinnati RoadRunner? Could you let
> me know what your setup is?
>
How different is Cincinnati from Columbus?
_______________________________________________
ShareTheNet maillist - [EMAIL PROTECTED]
http://www.webserv.com/mailman/listinfo/sharethenet
