Dave:
I do not have the latch assembly for you and finding a good one would be
the ideal solution.
If you can not find one and your mechanism is intact and just corroded
you could try soaking it in Evaporust for a few days.
That should strip all the rust off leaving the good metal. Then treat
it with a rust inhibitor and reinstall.
Hope this helps
Dennis L. cote
> From: David Salamone
> Subject: Omni inner door parts needed
>
> I'm having a friend of mine fix the ailing driver side door assembly on my
> 1979 Omni. The outer door handle is unbroken but the inside mechanism that's
> behind the striker assembly is rusted out causing the door not to engage
> properly.
>
> The only Omni/Horizon's in the local junkyards are missing the door insides
> and I don't have any extra Omni doors. Does anyone have an rusted out door
> they could grab that assembly off of? It's pretty small assembly and easy to
> mail out.
>
> David Salamone
___________REMOVE-FOOTER-WHEN-REPLYING_________
ShelbyDodge mailing list
[email protected]
http://www.imagilist.com/mailman/listinfo/shelbydodge
