They are all compatible.
You can also use the newer style PT cruiser lash adjusters if you get a spacer washer for them. They are a hair shorter than the 8V lifters but if you just shim them with a hardware store washer they work perfectly.
They are actually a better lifter because they don't overpump with oil at higher RPMs due to a release hole in their tip.
They are easily identifiable due to the hole in the tip of the adjuster. I think they came on '01 and newer PTs.
-Rich On Mon, 12 Jan 2009, Darrell - wrote:
Date: Mon, 12 Jan 2009 14:51:49 -0500 From: Darrell - <[email protected]> To: [email protected] Subject: SD> "lifter" question Hello, I was wondering if anyone knew if the "lifters" are the same on a roller cam engine versus a solid rocker cam engine. I have a 89 turbo 2.2 making excessive valve train noise at idle but once the idle is increased just a bit, it goes away and remains quiet until it idles back down again. the engine has 144,000 on it runs like a top. its just its embarrassing to hear this noise while sitting at idle. I was thinking maybe replacing these might help quiet it down. Thank you in advance!Darrell _________________________________________________________________ Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_explore_012009 ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
