Dave & list:
I think there may be a way around this.
If you are willing to convert to an aftermarket power window kit.
I have seen kits that convert to a power vertical lift, deleting the
factory regulator.
Has anyone tried this on an Omni/Horizon?
Could you re-adhere the original piece using urethane windshield adhesive?
Dennis in Delhi, CA
> From: David Salamone <[email protected]>
> Subject: Re: SD> L body window parts needed
>
> Hi, I have an 86 GLH and the drivers window falls forward everytime you put
> it up. You have to hold it back while you crank it up.
>
> I took door panel off and can't find anything wrong or broken. Has anyone
> encountered this problem before? Please help!
>
>
> I've had an ongoing issue with the same thing but mine is a little harder to
> fix. There's a metal plate that grabs a hold of a runner keeping this
> mechanism on track. If it loses grip it'll go up or down but nothing keeps it
> from falling forward.
>
> I bought a used one recently to fix my window issue but discovered something
> unusual. On the very early model that I have (a 1979 Omni) the inner door
> assembly is completely different than the ones used in the more more common
> mid 1980's models (and it's too different to be adapted properly).
>
> Now I need to ask the collective if anyone has access to a driver side 1978
> or 1979 Omni door that has a properly functioning window mechanism. I could
> really use these inner parts, unfortunately the later years from 1980 to 1990
> won't work.
>
> David Salamone
> Positive Impressions
> [email protected]
___________REMOVE-FOOTER-WHEN-REPLYING_________
ShelbyDodge mailing list
[email protected]
http://www.imagilist.com/mailman/listinfo/shelbydodge
