Sanden makes fantastic units. You could contact them and they should be able to get a cross reference that would replace the old one.
Are you going new freon? ----- Original Message ----- From: "David Salamone" <[email protected]> To: "Shelby Dodge Mailing List" <[email protected]> Sent: Tuesday, August 25, 2009 12:07 AM Subject: SD> AC repair work > As usual, it's pretty hot here in north Florida and and I'm finally > starting to tackle the project of fixing my A/C. Luckily I've got a local > friend that used to own a garage that specialized in A/C repairs. He's > working from his home now but he still has the specialized equipment for > A/C. > > When it initially stopped working I had it looked at and it appeared to be > a bad compressor. I've been luckier in the past when it was only the > clutch unit that went bad, but this time it looks more involved (and > expensive). > > I was looking to get some feedback on a couple of things. First I wanted > to see if someone had any additional ideas on where to buy the best > compressor that'll give me the maximum performance for the longest time > period. I don't want to buy a cheaply made Chinese knockoff only to have > it go bad after a short time. > > The unit that fits my vehicle is a Denso 10PA17C with a single groove > pulley. I've done some research online and I found a few potential > resources. These were some of the main ones. > > http://www.discountacparts.com/ > Looks pretty good with a choice of either rebuilt, new OEM & new 3rd party > house brand with a solid warranty and free shipping. > > http://www.carpartswholesale.com/ > Has an extended lineup of six different options including brands like 4 > Seasons, Spectra, HRM & Mapco. > > http://www.ackits.com/ > Seems to one of the more established online suppliers. > > I also wanted to see if there was a high quality 3rd party one like a > Sanden or a Seltec that could be adapted to fit as well (and what type of > brackets or parts would be needed). I found a Sanden listing for a 1994-95 > Dakota with a 2.5 but I'm not sure what other differences there might be > (hose connections, etc). Any ideas on this subject? > > David Salamone > Positive Impressions > Jacksonville, FL 32222 > www.unleashedbyshelby.com > > ___________REMOVE-FOOTER-WHEN-REPLYING_________ > ShelbyDodge mailing list > [email protected] > http://www.imagilist.com/mailman/listinfo/shelbydodge ___________REMOVE-FOOTER-WHEN-REPLYING_________ ShelbyDodge mailing list [email protected] http://www.imagilist.com/mailman/listinfo/shelbydodge
