Hello,
We just acquired Shimmer kit and I would like to test the 802.15.4 capabilities with a real traffic from an ECG or EMG sensor. First, I noticed several errors or imprecision on the Shimmer User Manual (Rev2Rd): - Source code for HelloWorld (modify "boot ready" to "bool ready" in module HelloWorldC and COMPONENT=TestBluetoothAppC to COMPONENT=HelloWorldAppC in Makefile) - In the section 5.5.2, there are some problem with permission (we have to use the "sudo bash" command at the beginning) - Same section, it is really not clear which node is supposed to be bootstrapped (span or shimmer sensor): same ttyUSB0 used for every command - ./zattach -v -n /dev/ttyUSB0 should be replaced, I guess, by ./zattach -v -n /dev/ttyUSB1 Secondly, we plan to use ECG and EMG sensors and I saw on the YouTube tutorial that they use a sort of stickers to attach the electrodes. I would like to know where we can find this type of equipment or if we can just use tape or adhesive bandage without disturbing the measures. Thank you in advance for your help. Best regards, Karel -- Dr. Karel Heurtefeux - PhD - www.heurtefeux.info Research Scientist cid:CE388145-2989-4E3F-A3CB-65A5B81DDBCAQatar Mobility Innovations Center - <http://www.quwic.com/> www.qmic.com Qatar Science & Technology Park PO Box 210531 - Doha, Qatar Cell Phone: +974 6683 4135 | Office: +974 4459 3697 | Fax: +974 4459 2724 Skype: heurtefeux
<<image001.png>>
<<image002.png>>
_______________________________________________ Shimmer-users mailing list [email protected] https://lists.eecs.harvard.edu/mailman/listinfo/shimmer-users
