Hello, when using the nagios3 cgi interface and the status broker modules with the same config file the warnings of shinken about object_cache_file and status_file are a bit nasty, as they are needed by the nagios cgi interface.
If the the nagios experts are shure nagios cgi is only needing those locations and nothing else from the config, using a separate config would also be ok for me. Otherwise user friendliest is probably a nagios3-compatible parameter which disables the warnings. Just my ideas, thanks, Hermann [1280923208] Notice : the parameter object_cache_file is useless and can be removed from the configuration (Reason: This parameter is not longer take from the main file, but must be defined in the status_dat broker module instead. But Shinken will create you one if there are no present and use this parameter in it, so no worry.) [1280923208] Notice : the parameter status_file is useless and can be removed from the configuration (Reason: This parameter is not longer take from the main file, but must be defined in the status_dat broker module instead. But Shinken will create you one if there are no present and use this parameter in it, so no worry.) -- Netzwerkadministration/Zentrale Dienste, Interdiziplinaeres Zentrum fuer wissenschaftliches Rechnen der Universitaet Heidelberg IWR; INF 368; 69120 Heidelberg; Tel: (06221)54-8236 Fax: -5224 Email: hermann.la...@iwr.uni-heidelberg.de ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Shinken-devel mailing list Shinken-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shinken-devel
