Zach, Frankly, I don't think low torque makes any difference other than it feels stiffer. If the flex is right for your swing, the head will be square. I was 97-103 mph and a CVP-150 S at 3.9� torque felt just right to me. Any stiff shaft around 2.5�- 3.5� should work fine. Remember that a long driver shaft plays a little softer beacuse of the high swingweight. I've never even looked for long shafts that stiff, but Graman makes a couple XX, Harrison has some overpriced ones, etc. Check in Clubmaker Online's long driver section (if you can find it). The Aldila Longwood 50/50, CVP-150, and Pure Energy which I use are all too soft for what you're looking for. If you only want to go to 47", there are a lot of XX shafts at 46" lengths.
Bernie Writeto: [EMAIL PROTECTED] ----- Original Message ----- From: "Zach" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 24, 2002 12:59 PM > WHAT IS THE DIFFERENCE BETWEEN A SHAFT WITH 1.8 TORQUE > AND ONE WITH 3.0 TORQUE. WHICH WOULD BE BETTER FOR A > LONG DRIVER. I SWING AT ABOUT 115 MPH WITH A 44 INCH > CLUB. A XX STIFFNESS IS WHAT I AM LOOKING FOR. ARE > THERE ANY SHAFTS THAT YOU WOULD RECOMMEND. > > ===== > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > "Carpe diem,quam minimum credula a postero." > Sieze the day, and put the least possible trust in tomorrow. > > __________________________________________________ > Do You Yahoo!? > Sign up for SBC Yahoo! Dial - First Month Free > http://sbc.yahoo.com > >
