>Zach, > >Frankly, I don't think low torque makes any difference other than it feels >stiffer. If the flex is right for your swing, the head will be square. I was >97-103 mph and a CVP-150 S at 3.9� torque felt just right to me. Any stiff >shaft around 2.5�- 3.5� should work fine. Remember that a long driver shaft >plays a little softer beacuse of the high swingweight. I've never even >looked for long shafts that stiff, but Graman makes a couple XX, Harrison >has some overpriced ones, etc. Check in Clubmaker Online's long driver >section (if you can find it)
that would be http://clubmaker-online.com/longdrive.com.html easy to find via the navigation bar, search page or various links all over the web site or by sending me an email....I'd suggest either an Accuflex longdrive shaft or a penley longdrive shaft. The Penleys and Accuflex are priced much better than the Harrisons.--john/shoptalk/clubmaker online >. The Aldila Longwood 50/50, CVP-150, and Pure >Energy which I use are all too soft for what you're looking for. If you only >want to go to 47", there are a lot of XX shafts at 46" lengths. > >Bernie >Writeto: [EMAIL PROTECTED] > > > >----- Original Message ----- >From: "Zach" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, July 24, 2002 12:59 PM > > >> WHAT IS THE DIFFERENCE BETWEEN A SHAFT WITH 1.8 TORQUE >> AND ONE WITH 3.0 TORQUE. WHICH WOULD BE BETTER FOR A >> LONG DRIVER. I SWING AT ABOUT 115 MPH WITH A 44 INCH >> CLUB. A XX STIFFNESS IS WHAT I AM LOOKING FOR. ARE >> THERE ANY SHAFTS THAT YOU WOULD RECOMMEND. >> >> ===== >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> "Carpe diem,quam minimum credula a postero." >> Sieze the day, and put the least possible trust in tomorrow. >> >> __________________________________________________ >> Do You Yahoo!? >> Sign up for SBC Yahoo! Dial - First Month Free >> http://sbc.yahoo.com >> >>
