RE: ShopTalk: Heat Source

[Greg Zachmann]

Hi Chris,   I also have a problem with epoxy oozing out around the ferrule. Heat curing seems a great way to get a quicker cure without the Royal Onyx/SA 2000 worries. The attention required because of the the drooling epoxy is a pain. I wonder if anyone has run across the same glitch and come up with a solution?   Take care,   GregZ       -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Burns Sent: Friday, August 02, 2002 9:30 PM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: Heat Source Harold:   Speaking of heat containment, I forgot to mention that I set the lamp on a cookie sheet to help shield some of the heat from the top of my workbench.  I don't put anything on the plywood wallboard behind the clubs.  I find it doesn't get as hot as the benchtop.   Chris Burns   ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, August 02, 2002 6:10 PM Subject: Re: ShopTalk: Heat Source Chris: Thanks for the info! I think this method will be safer than the Electric heaters I have been using. I use a cement fiber board as a back stop behind the clubs to somewhat contain the heat with a thermometer attached. HStill