Lloyd, I estimate that the 5" clamp length would add about 2-4 CPM to the readings I get at a 4.5" clamp length. Using a correction of 3 CPM per club, all of the irons are pretty much right on the money, or at least within 4 CPM down to the PW (297.3 vs. 298). BTW, I tried softer shafts in the short irons (flat-line on up to the 2 CPM slope I used), but found I liked the feel of the slightly stiffer shafts better. I think I will try a stiffer shaft in the 3 and 5 woods, and if I like the feel, I may reshaft the driver. Thanks for the input!
Tedd -----Original Message----- From: Lloyd Hackman [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 19, 2002 9:45 AM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: History of Frequency Tedd It relates to a 5" clamp length with a grip. Your numbers below look good. You might try a little stiffer wood but long irons look very close considering the + or - 4 Cycle range that they should be within. Short Irons might be just a little stiff. llhack LEGAL NOTICE Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this E-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents of this E-mail or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately.
