Re: Re: ShopTalk: epoxy paint system

[kellcats]

RK,
Do you have more info or links??  I'm interested in this, as it would be much 
easier/safer to spray, especially if I can use the equipment I already have....

Thanks,
Pat K
> 
> From: "Richard Kennedy" <[EMAIL PROTECTED]>
> Date: 2002/10/18 Fri AM 10:58:55 EDT
> To: <[EMAIL PROTECTED]>
> Subject: Re: ShopTalk: epoxy paint system
> 
> I hope you know that Ford Motor along with BASF developed a line of very
> high chip resistant water soluble paints and clear coats.
> 
> 
> 
> RK
> 
> 
> 
> Manufacturer's of World Class Golf Club Repair Equipment
> 
> [EMAIL PROTECTED]
> 
> -------Original Message-------
> 
> 
> 
> From: [EMAIL PROTECTED]
> 
> Date: Friday, October 18, 2002 10:11:51 AM
> 
> To: [EMAIL PROTECTED]
> 
> Subject: ShopTalk: epoxy paint system
> 
> 
> 
> One of the digest members sent this along (digest subscriptions can't 
> 
> post, only regular list. Here's his message:
> 
> 
> 
> I HAVE A EPOXY SYSTEM. WORKS VERY WELL ON GOLF CLUBS. I USE A INFRARED
> HEATER
> 
> THAT I PLACE IN FRONT OF THE CLUB TO CURE. I CHECK TEMPERATURE WITH A
> INFRARED
> 
> PYROMETER AT 400F FOR 15 MINUTES. FINISH IS QUITE DURABLE AS COMPARED TO
> PAINT
> 
> AND LOOKS MUCH BETTER THAN MOST PAINTS. I ALSO HAVE USED A NUMBER OF
> AUTOMOTIVE
> 
> PAINTS THAT WERE QUITE GOOD ALSO.
> 
> THANKS
> 
> REED
> 
> [EMAIL PROTECTED]
> 
> -- 
> 
> Thanks!
> 
> John Muir
> 
> http://clubmaker-online.com
> 
> http://gripscience.com
> 
> 810.220.4918
> 
> 
> 
> .
> 

I hope you know that Ford Motor along with BASF developed a line of very high chip resistant water soluble paints and clear coats.   RK   Manufacturer's of World Class Golf Club Repair Equipment [EMAIL PROTECTED] -------Original Message-------   From: [EMAIL PROTECTED] Date: Friday, October 18, 2002 10:11:51 AM To: [EMAIL PROTECTED] Subject: ShopTalk: epoxy paint system   One of the digest members sent this along (digest subscriptions can't post, only regular list. Here's his message: I HAVE A EPOXY SYSTEM. WORKS VERY WELL ON GOLF CLUBS. I USE A INFRARED HEATER THAT I PLACE IN FRONT OF THE CLUB TO CURE. I CHECK TEMPERATURE WITH A INFRARED PYROMETER AT 400F FOR 15 MINUTES. FINISH IS QUITE DURABLE AS COMPARED TO PAINT AND LOOKS MUCH BETTER THAN MOST PAINTS. I ALSO HAVE USED A NUMBER OF AUTOMOTIVE PAINTS THAT WERE QUITE GOOD ALSO. THANKS REED [EMAIL PROTECTED] -- Thanks! John Muir http://clubmaker-online.com http://gripscience.com 810.220.4918 .

<<inline: reply>>