Pat, I just know of the paint, Ford & BASF, from intercompany
hype. That is the reason so many car's & truck's
now-a-days have painted grill openings, like Expedition & Explorer
plus all of their car's even Jaguar & Volvo. Sorry
but that's all I know. At work, in 1993, they showed us
movies of up coming ideas and products. They had a
movie of a Taurus being driven behind a group of trucks, Ford Trucks of
course, on a "VERY" rocky road, and it wasn't ice cream either, and just
how well the paint preformed. In the same movie they showed a
clip of competitive Value Engineering between an F150 Ford & a 1500
Series Chevy/GMC, those of you who think that there's a difference between
a Chevy & a GMC get a life, they're made on the same line by the same
unskilled workers, not unlike the workers at Dodge & Ford  plus even
worse the transplants. In the movie they took 2 brand new
F150's and 1 each brand new, right from a Chevy/ GMC dealer, a 1500 series
truck and loaded them all up with 1 ton of boulders and drove them all 2
laps around the Ford Truck Test Track. The Truck Engineer's stated
the reason for only 2 laps was because the Chevy's & the GMC's boxes
fell off the trucks after just 2 laps.
RK
Manufacturer's of World Class Golf Club Repair
Equipment
-------Original Message-------
Date: Friday, October
18, 2002 11:23:53 AM
Subject: Re: Re:
ShopTalk: epoxy paint system
RK,
Do you have more info or links?? I'm interested in
this, as it would be much easier/safer to spray, especially if I can use
the equipment I already have....
Thanks,
Pat K
>
>
From: "Richard Kennedy" <[EMAIL PROTECTED]>
>
Date: 2002/10/18 Fri AM 10:58:55 EDT
> To: <[EMAIL PROTECTED]>
>
Subject: Re: ShopTalk: epoxy paint system
>
> I hope you know
that Ford Motor along with BASF developed a line of very
> high chip
resistant water soluble paints and clear coats.
>
>
>
> RK
>
>
>
> Manufacturer's of World
Class Golf Club Repair Equipment
>
> [EMAIL PROTECTED]
>
> -------Original Message-------
>
>
>
>
From: [EMAIL PROTECTED]
>
> Date: Friday, October 18, 2002 10:11:51 AM
>
> To:
[EMAIL PROTECTED]
>
> Subject: ShopTalk: epoxy paint system
>
>
>
> One of the digest members sent this along (digest subscriptions
can't
>
> post, only regular list. Here's his
message:
>
>
>
> I HAVE A EPOXY SYSTEM. WORKS
VERY WELL ON GOLF CLUBS. I USE A INFRARED
> HEATER
>
>
THAT I PLACE IN FRONT OF THE CLUB TO CURE. I CHECK TEMPERATURE WITH
A
> INFRARED
>
> PYROMETER AT 400F FOR 15 MINUTES.
FINISH IS QUITE DURABLE AS COMPARED TO
> PAINT
>
> AND
LOOKS MUCH BETTER THAN MOST PAINTS. I ALSO HAVE USED A NUMBER OF
>
AUTOMOTIVE
>
> PAINTS THAT WERE QUITE GOOD ALSO.
>
> THANKS
>
> REED
>
> [EMAIL PROTECTED]
>
>
--
>
> Thanks!
>
> John Muir
>
>
http://clubmaker-online.com
>
> http://gripscience.com
>
>
810.220.4918
>
>
>
> .
>
| 
