Re: ShopTalk: How to pick torque?

[Lloyd Hackman]

Mike   The Torque of the shaft must be designed to resist the toe impact with the golf ball. Despite what most on this forum think or imply the player can not apply enough torque to the shaft during the swing to significantly deflect the shaft in torque Therefore the primary purpose for shaft torque is to maintain a degree of accuracy on off the sweet spot impacts. I assume everyone wants the best accuracy possible, so every one should have the lowest torque possible.   llhack ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, March 19, 2003 12:26 PM Subject: Re: ShopTalk: How to pick torque?   David, Thanks for the response. I can understand your comment it makes sense. The problem is once I get the info what do I do with it. Example, I was looking a a 50gr shaft with a torque of 4.0 the same company makes a  different 50gr shaft that has a torque of 2.5. Must be a reason, assuming that they measure out this way on the CS III or what ever. In the production of shafts it makes sense that it would be easier / cheaper to make a high torque, light weight shaft that a low torque one, are we just talking price here? Now I notice that the high torque shafts will have a softer feel but other than that my real question is, is there some marker that should tell me a customer should be fitted with a higher torque shaft when there is a choice. Lloyd, thank you also for the response but your reply seems a liitle too "broad brush" for me to accept easily. If in fact lower always = better well I guess I will accept it but if there is one thing I have learned while doing this it is that there always seems to be give and take when fitting clubs. MIke   When choosing shafts for a customer is their a rule of thumb to look at for shaft torque? There are many shafts that have similar swing speed ratings but very different torque. Rather than simply trial and error there must be something to work from. It seems easy to say that a low torque shaft is better but there must be something that falls under the "no free lunch" rule or a time when a higher torque shaft is the correct choice. Hi Mike, Unless you have a torque machine such as John Kaufmans Club Scout III and you make sure to compare torque measurements from shaft to shaft using the same beam length you have ZERO bases for comparing torque because what the shaft CO's tell you means nothing. David