Don, You can try calibrating your NF2, but at this point you may only get close. Calibration is really not important in matching a set of shafts. The numbers you will be using are all relative. You'll get raw deflection on the NBP, and spine deflection number (if you even want to keep it) for each shaft you are using and compare one to the other...same machine, same beam length, same operator.
You'll start out by sorting your shafts by the raw deflection, select which shaft you want to use for each club in the set, select a baseline shaft you want all other shafts to match and do a tip sensitivity on the baseline shaft to determine your tip trim increment. Then, you figure a target deflection for each club based on the baseline shaft you've chosen. Finishing up, you put each shaft back in the NF2, slide it to read the target deflection, mark and trim. After a little practice, it's fast, accurate and a whole lot of fun (when you are only occasionally doing a set or two). You can get a good idea of my procedure by looking at the tables. Be sure to weigh everything on a gram scale. If you have any questions when you are matching your first set of clubs on your NF2, I'll try to answer them. Bernie Writeto: [EMAIL PROTECTED] ----- Original Message ----- From: "Don Flatgard" <[EMAIL PROTECTED]> To: "shoptalk" <[EMAIL PROTECTED]> Sent: Friday, September 26, 2003 11:06 AM Subject: ShopTalk: Re: Tables for Flatgard] > I got the tables. > Thanks for the help Steve and Bernie, > I've made 2 Nuefinder's, sold one of those, have one for sale, plus one > under construction but never used it for shaft matching. > I've have some Powerflex shafts one the way, sure will help to have > something to compare what I am doing and to calibrate my NF 2. df > > > > > ----- Original Message ----- > From: "Steve Fritz" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, September 25, 2003 4:55 PM > Subject: [Fwd: Tables for Flatgard] > > > > Don, > > >From Bernie... > > Steve > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Steve Fritz ... [EMAIL PROTECTED] > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > > ---------------------------- Original Message ---------------------------- > > Subject: Tables for Flatgard > > From: "Bernie Baymiller" <[EMAIL PROTECTED]> > > Date: Thu, September 25, 2003 5:47 pm > > To: [EMAIL PROTECTED] > > -------------------------------------------------------------------------- > > > > Two NF2 records tables for Don Flatgard. The Match table is the master, > > the PP table is one that I filled out. > > > > It would be very simple for Don to ask his ISP to simply take Knology.net > > off the spam list. I get maybe a couple of spams a month from this ISP, > > even as a customer. > > > > Bernie > > Writeto: [EMAIL PROTECTED] > > > > > > >
