I understand about them being relative, I just want to compare with some one else to see if I am close. Thanks...df ----- Original Message ----- From: "Bernie Baymiller" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, September 26, 2003 12:48 PM Subject: Re: ShopTalk: Re: Tables for Flatgard]
> Don, > > You can try calibrating your NF2, but at this point you may only get close. > Calibration is really not important in matching a set of shafts. The numbers > you will be using are all relative. You'll get raw deflection on the NBP, > and spine deflection number (if you even want to keep it) for each shaft you > are using and compare one to the other...same machine, same beam length, > same operator. > > You'll start out by sorting your shafts by the raw deflection, select which > shaft you want to use for each club in the set, select a baseline shaft you > want all other shafts to match and do a tip sensitivity on the baseline > shaft to determine your tip trim increment. Then, you figure a target > deflection for each club based on the baseline shaft you've chosen. > Finishing up, you put each shaft back in the NF2, slide it to read the > target deflection, mark and trim. After a little practice, it's fast, > accurate and a whole lot of fun (when you are only occasionally doing a set > or two). > > You can get a good idea of my procedure by looking at the tables. Be sure to > weigh everything on a gram scale. If you have any questions when you are > matching your first set of clubs on your NF2, I'll try to answer them. > > Bernie > Writeto: [EMAIL PROTECTED] > > ----- Original Message ----- > From: "Don Flatgard" <[EMAIL PROTECTED]> > To: "shoptalk" <[EMAIL PROTECTED]> > Sent: Friday, September 26, 2003 11:06 AM > Subject: ShopTalk: Re: Tables for Flatgard] > > > > I got the tables. > > Thanks for the help Steve and Bernie, > > I've made 2 Nuefinder's, sold one of those, have one for sale, plus one > > under construction but never used it for shaft matching. > > I've have some Powerflex shafts one the way, sure will help to have > > something to compare what I am doing and to calibrate my NF 2. df > > > > > > > > > > ----- Original Message ----- > > From: "Steve Fritz" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, September 25, 2003 4:55 PM > > Subject: [Fwd: Tables for Flatgard] > > > > > > > Don, > > > >From Bernie... > > > Steve > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > Steve Fritz ... [EMAIL PROTECTED] > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > > > > > ---------------------------- Original > Message ---------------------------- > > > Subject: Tables for Flatgard > > > From: "Bernie Baymiller" <[EMAIL PROTECTED]> > > > Date: Thu, September 25, 2003 5:47 pm > > > To: [EMAIL PROTECTED] > > > > -------------------------------------------------------------------------- > > > > > > Two NF2 records tables for Don Flatgard. The Match table is the master, > > > the PP table is one that I filled out. > > > > > > It would be very simple for Don to ask his ISP to simply take > Knology.net > > > off the spam list. I get maybe a couple of spams a month from this ISP, > > > even as a customer. > > > > > > Bernie > > > Writeto: [EMAIL PROTECTED] > > > > > > > > > > > > >
