http://www.busbymetals.com/docs/mach_page19.htm
Al
At 11:03 PM 10/27/2003, you wrote:
In a message dated 10/27/2003 10:46:31 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
http://www.busbymetals.com/docs/mach_page11.htm
- Hi All,
- I have a lot of beryllium copper wedges that need to be reamed to . 370 and am having difficulty because of the heat the reamer wants to stick in the head, I have tried using a cutting oil but it doesn't really seem to help and its so thick that it is hard to clean out with acetone afterwards, I would prefer to not use oil at all to save the cleaning step.
- I tried my . 370 drill bits but found that they were actually . 364 and the shafts are . 368.
- I also have a lot of steel wedges, but they don't seem to be a problem, I think the beryllium is somehow wanting to meld with the reamer as it heats up.
- Any suggestions would be appreciated.
- Thanks,
- David
