Re: ShopTalk: Mr. Kennedy

[Jim & Ivette]

I need some advice purchasing a drill press set up, my work shop is progressing nicely and it is time to get a drill press and all the things i will need for repairs and custom building. I need everything, reamers,clamps etc. what do you recommend for a good set up, my budget is around $1000.00. thanks - Jim Letourneau ----- Original Message ----- From: Richard Kennedy To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Friday, December 19, 2003 10:24 AM Subject: Re: ShopTalk: Drill Bit Having not ever used a drill bit on "ANY" clubhead I wouldn't know how to help you.    Now since a Ping head uses a tappered shaft tip I would first try the 5/16" - 18 tap then if that stilled failed I would start with a .354 reamer and work my way up to a .373 reamer.    Never drill out a hole, drills are designed to "MAKE" holes not open them up, that's what reamers were designed for.    RK   KENNEDY        golf equipment manufacturer's of world class golfclub repair equipment -------Original Message-------   From: [EMAIL PROTECTED] Date: Thursday, December 18, 2003 10:03:18 PM To: [EMAIL PROTECTED] Subject: Re: ShopTalk: Drill Bit   In a message dated 12/18/2003 7:37:53 PM Eastern Standard Time, [EMAIL PROTECTED] writes: Does anyone know of a source for a drill bit that will drill out a shaft which is broken inside the hosel of a Ping Eye 2 iron?    Thanks,   Jim McFerran Try using a 5/16" tap and some heat.   Kennedy                 golf-equipment manufacturer's of world class club repair tooling