True Temper Shaft "UJICO". I believe quit making them but there is probably a few left around. I had a couple of customers who had the 1200's and I stocked them as they kept breaking.
----- Original Message ----- From: "Mike Walker" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, December 22, 2003 10:06 AM Subject: RE: ShopTalk: Wilson 1200 iron reshaft > Jason, > A standard .370 parallel shaft will fit over the hosel. > To get the right shaft, measure from tip to first step and measure the width > of the steps. > Use the measurements to find the right replacement shaft. > Mike Walker > www.walktech.com > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of > > [EMAIL PROTECTED] > > Sent: Friday, December 19, 2003 11:04 AM > > To: [EMAIL PROTECTED] > > Subject: ShopTalk: Wilson 1200 iron reshaft > > > > > > I have a Wilson 1200 8iron to reshaft but the problem is the > > shaft fits over > > a steel dowel on the iron head. I measured the shaft tip outer > > diameter and > > it is 0.40mm, not the standard 0.370mm. Does anyone know of a shaft that > > will work on this type of club head or will I have to send it to > > Wilson for > > reshafting? > > > > Happy Holidays, > > Jason > > > > > > HUBER+SUHNER will be closed for the holidays starting on December > > 24th from 2 pm until Monday, January 5th. Happy Holidays! > > __________________________________________________________________ > > ____________________________ > > Disclaimer: > > This message is confidential. It may also be privileged or > > otherwise protected by work product immunity or other legal > > rules. If you are not the named addressee you should not > > disseminate, distribute or copy this e-mail. Please notify the > > sender immediately by e-mail if you have received this e-mail by > > mistake and delete this e-mail from your system. Please note that > > any views or opinions presented in this email are solely those of > > the author and do not necessarily represent those of the company. > > All deliveries and services are subject to our General Terms and > > Conditions of Sales. > > > > Warning: Although the company has taken reasonable precautions to > > ensure no viruses are present in this email, the company cannot > > accept responsibility for any loss or damage arising from the use > > of this email or attachments. > > __________________________________________________________________ > > ____________________________ > > >
