Have you considered measuring the o.d. of the hosel insert? TFlan
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, December 22, 2003 9:40 AM Subject: RE: ShopTalk: Wilson 1200 iron reshaft > Thanks for responding to my e-mail. A .370 parallel shaft seems to be a > little small when holding it up to the steel dowel on the iron. Is it > possible to force the shaft over the dowel by hammering or will the shaft > not stretch in diameter? Also, Is the True Temper Shaft UJICO an oversized > tip and/or was it manufactured specially for Wilson? > > Thanks, > Jason > > -----Original Message----- > From: David Jamieson [mailto:[EMAIL PROTECTED] > Sent: Monday, December 22, 2003 10:15 AM > To: [EMAIL PROTECTED] > Subject: Re: ShopTalk: Wilson 1200 iron reshaft > > > True Temper Shaft "UJICO". I believe quit making them but there is > probably a few left around. I had a couple of customers who had the 1200's > and I stocked them as they kept breaking. > > ----- Original Message ----- > From: "Mike Walker" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, December 22, 2003 10:06 AM > Subject: RE: ShopTalk: Wilson 1200 iron reshaft > > > > Jason, > > A standard .370 parallel shaft will fit over the hosel. > > To get the right shaft, measure from tip to first step and measure the > width > > of the steps. > > Use the measurements to find the right replacement shaft. > > Mike Walker > > www.walktech.com > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of > > > [EMAIL PROTECTED] > > > Sent: Friday, December 19, 2003 11:04 AM > > > To: [EMAIL PROTECTED] > > > Subject: ShopTalk: Wilson 1200 iron reshaft > > > > > > > > > I have a Wilson 1200 8iron to reshaft but the problem is the > > > shaft fits over > > > a steel dowel on the iron head. I measured the shaft tip outer > > > diameter and > > > it is 0.40mm, not the standard 0.370mm. Does anyone know of a shaft > that > > > will work on this type of club head or will I have to send it to > > > Wilson for > > > reshafting? > > > > > > Happy Holidays, > > > Jason > > > > > > > > > HUBER+SUHNER will be closed for the holidays starting on December > > > 24th from 2 pm until Monday, January 5th. Happy Holidays! > > > __________________________________________________________________ > > > ____________________________ > > > Disclaimer: > > > This message is confidential. It may also be privileged or > > > otherwise protected by work product immunity or other legal > > > rules. If you are not the named addressee you should not > > > disseminate, distribute or copy this e-mail. Please notify the > > > sender immediately by e-mail if you have received this e-mail by > > > mistake and delete this e-mail from your system. Please note that > > > any views or opinions presented in this email are solely those of > > > the author and do not necessarily represent those of the company. > > > All deliveries and services are subject to our General Terms and > > > Conditions of Sales. > > > > > > Warning: Although the company has taken reasonable precautions to > > > ensure no viruses are present in this email, the company cannot > > > accept responsibility for any loss or damage arising from the use > > > of this email or attachments. > > > __________________________________________________________________ > > > ____________________________ > > > > > > HUBER+SUHNER will be closed for the holidays starting on December 24th from 2 pm until Monday, January 5th. Happy Holidays! > ____________________________________________________________________________ __________________ > Disclaimer: > This message is confidential. It may also be privileged or otherwise protected by work product immunity or other legal rules. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. All deliveries and services are subject to our General Terms and Conditions of Sales. > > Warning: Although the company has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments. > ____________________________________________________________________________ __________________
