Grant wrote: > I've got packet shaping set up with a basic config and I'm wondering > if anyone has any recommendations for these settings. The main thing > to be moving along priority 4 should be p2p. Is this only shaping the > outbound traffic or is it doing ingress too?
Given that you are asking this question, you can't have read the documentation very carefully. But to answer your question, you are only shaping outbound traffic. You are dropping inbound traffic in excess of 1000kbps. > > tcdevices: > eth0 1000kbps 100kbps Your values look like you have just used the published (max) data rates specified by your ISP. Those are usually too high. There is a procedure in the documentation for tuning IN-BANDWIDTH; OUT-BANDWIDTH is usually set between 80 and 90% of the maximum. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
