Grant wrote: >>> I've got packet shaping set up with a basic config and I'm wondering >>> if anyone has any recommendations for these settings. The main thing >>> to be moving along priority 4 should be p2p. Is this only shaping the >>> outbound traffic or is it doing ingress too? >> Given that you are asking this question, you can't have read the >> documentation very carefully. But to answer your question, you are only >> shaping outbound traffic. You are dropping inbound traffic in excess of >> 1000kbps. >> >>> tcdevices: >>> eth0 1000kbps 100kbps >> Your values look like you have just used the published (max) data rates >> specified by your ISP. Those are usually too high. There is a procedure >> in the documentation for tuning IN-BANDWIDTH; OUT-BANDWIDTH is usually >> set between 80 and 90% of the maximum. > > I actually used data from the various flash tests around the internet > to arrive at those numbers. I read shorewall-tcdevices.html and I'd > like to move the inbound queue off of my cable provider, but it > doesn't say how to do that. Should I just set it to the max?
A) go to http://www.shorewall.net/traffic_shaping.htm B) scan down the page until you get to the description of IN-BANDWIDTH. C) read ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
