On 5/7/11 7:01 AM, Sebastian Tänzer wrote:
> Hello list,
>
> system is a Debian 6.0 using manually installed 4.4.19.1 from source. Setup
> is a multi-ISP setup running on eth1 and ppp0 which WAS working fine so far
> but since the upgrade to 4.4.19.1 doesn't work reliably anymore, too.
>
> A restart of shorewall brings up this error (which wasn't there when using
> the shorewall version coming with Deb 6.0):
>
> firewall:~# shorewall restart
> Compiling...
> Processing /etc/shorewall/params ...
> Processing /etc/shorewall/shorewall.conf...
> Loading Modules...
> Compiling /etc/shorewall/zones...
> Compiling /etc/shorewall/interfaces...
> Determining Hosts in Zones...
> Locating Action Files...
> Compiling /etc/shorewall/policy...
> Adding rules for DHCP
> Compiling TCP Flags filtering...
> Compiling policy actions...
> Compiling /usr/share/shorewall/action.Reject for chain Reject...
> Compiling /usr/share/shorewall/action.Drop for chain Drop...
> Compiling Kernel Route Filtering...
> Compiling Martian Logging...
> Compiling /etc/shorewall/providers...
> Compiling /etc/shorewall/masq...
> Compiling MAC Filtration -- Phase 1...
> Compiling /etc/shorewall/rules...
> Compiling /etc/shorewall/tunnels...
> Compiling MAC Filtration -- Phase 2...
> Applying Policies...
> Generating Rule Matrix...
> Creating iptables-restore input...
> Compiling iptables-restore input for chain mangle:...
> Compiling /etc/shorewall/routestopped...
> Shorewall configuration compiled to /var/lib/shorewall/.restart
> Restarting Shorewall....
> Initializing...
> Setting up Route Filtering...
> Setting up Martian Logging...
> awk: BEGIN {default=0;}; \
> awk: ^ syntax error
> awk: Kommandozeile:1: /^default / {default=1; print; next}; \
> awk: Kommandozeile:1: ^ syntax error
> awk: Kommandozeile:2: /nexthop/ {if (default == 1 ) {print ; next} };
> \
> awk: Kommandozeile:2: ^ syntax error
> awk: Kommandozeile:3: { default=0; };
> awk: Kommandozeile:3: ^ syntax error
> Adding Providers...
> WARNING: Interface eth1 is not usable -- Provider ISP1 (1) not Added
> WARNING: No Default route added (all 'balance' providers are down)
> Setting up Traffic Control...
> Preparing iptables-restore input...
> Running /sbin/iptables-restore...
> IPv4 Forwarding Enabled
> Processing /etc/shorewall/started ...
> done.
>
> Has this been corrected in a more recent dev release perhaps?Something is odd on your system. I run the same combination and I don't get these syntax errors. Please try this: a) . /usr/share/shorewall/prog.header b) ip -4 route ls | save_default_route Do you see these errors in that case. -Tom -- Tom Eastep \ When I die, I want to go like my Grandfather who Shoreline, \ died peacefully in his sleep. Not screaming like Washington, USA \ all of the passengers in his car http://shorewall.net \________________________________________________
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
