Hello, I really like Shorewall ! Thanks for this piece of software ! I am using Shorewall on an ARM single computer with two NICs running on Debian 7.8 which runs perfectly. I installed the OpenVPN server on that single computer board and trying to get OpenVPN server running together with Shorewall. Unfortunately, it doesn't work as expected. Once Shorewall is disabled, I can connect an OpenVPN client to my OpenVPN server without any problems. However, after turning Shorewall on, the openvpn client fails to connect or keeping its VPN connection with the OpenVPN server.
I tested Shorewall and OpenVPN server on my local LAN. The ARM board has the IP address 192.168.70.19 and its Ethernet cable is plugged to eth0. Shorewall and OpenVPN server running on that board with the following Shorewall configuration : interfaces : net eth0 - dhcp,tcpflags,nosmurfs,routefilter,logmartians,sourceroute=0 loc eth1 - tcpflags,nosmurfs,routefilter,logmartians vpn tun0 zones : fw firewall net ipv4 loc ipv4 vpn ipv4 policy: net fw REJECT warning fw all ACCEPT vpn all ACCEPT net vpn ACCEPT info net loc DROP crit loc all ACCEPT tunnels: #TYPE ZONE GATEWAY GATEWAY ZONE openvpnclient:1194 net 192.168.70.19 I hope anyone can help me out. Thanks in advance ! Regards, Thomas Winkler ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
