Hello, On Tue, 2010-02-02 at 23:50 +0100, Martin Jansa wrote: > > I've downloaded it, and also downloaded the latest test image from > > http://build.shr-project.org/tests/mrmoku/unstable/images/om-gta02/ > > So I thought I'm on the bleeding edge now :-) > > Hehe those images are exactly the same as > http://build.shr-project.org/shr-unstable/images/om-gta02/ > > but in link you used you can download incomplete images which are still > being built. When image build is finished they are rsynced to normal > shr-unstable dir. > > I've removed the link with possible incomplete images to avoid > confusion.. >
I downgraded to kernel 2.6.31. It's working the same way as 2.6.32 did. Same issue for wlan and bluetooth. For both I can switch them to manual and poweron in SHR-settings, but they don't appear with ifconfig or hciconfig. For wlan there is no eth0 in the list. dmesg |grep gta02 gives me: gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1 gta02-pm-gps gta02-pm-gps.0: starting gta02-pm-wlan gta02-pm-wlan.0: starting Registered led device: gta02:red:aux gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 0 Should I change a config file or something? If anybody can help me with this....... > > So, I can't reboot the phone anymore :-( I use ssh to login into the > > phone and then type "reboot". The phone restarted and a kernel panic > > came up. (I have SHR running on my sd-card) > > > What I see on the screen: > > > > Kernel panic - not syncing: VFS: Unable to mount rootfs on > > unknown-block(0,0) > > [drm:glamo_display_panic] *ERROR* panic occurred, switching back to text > > console > > Did you put increased rootdelay as I suggested on README on > http://build.shr-project.org/tests/mrmoku/kms/images/om-gta02/ > > gena2x reported that he even need to tune sd clock a bit to get uSD > working > > 16:43 < gena2x> mickeyl: glamo_mci.sd_drive=2 glamo_mci.sd_max_clk=10000000 > 16:43 < gena2x> mickeyl: i used this one. dont know if this is optimal > > but my uSD needs just long rootdelay.. or delay from booting Qi with > POWER button pressed (delay+debug). > Removing the USB-cable before restarting, and it will restart, restart with USB-cable plugged in, panic. > > Remove battery and USB-cable, wait some seconds and try it again : No > > problem, phone boots fine. > > Don't forget to run fsck.. I'm getting quite a lot fs errors. The rest > doesn't seem kernel related.. > Which device should I check? /dev/mmcblk0p1 or something? > 'Illegal Instruction' is possible interworking issue, does it happen for > every video/audio for you or just some and other works? I've just tried > with random video I have on neo and mplayer works for me.. > > mplayer_0.0+1.0rc3+gitr29790+71807fcbb1eb35c337ef03f4f62d181963173550-r0.4_armv4t.ipk > > but I've seen Koen to downgrade other mplayer recipe version because of > audio decoding issues.. With the newest image of 15 februari, this is gone. > > Regards, > _______________________________________________ Shr-devel mailing list Shr-devel@lists.shr-project.org http://lists.shr-project.org/mailman/listinfo/shr-devel
