Am Donnerstag 22 April 2010 20:16:55 schrieb SAL-e:
> On Thu, Apr 22, 2010 at 1:07 AM, Thomas Zimmermann <[email protected]> wrote:
> > Am Donnerstag 22 April 2010 09:55:18 schrieb SAL-e:
> >> Thanks Thomas.
> >>
> >> I see. After rerunning the 'make setup' 3 times It was able to finish.
> >> Why the git servers are slow or not reliable? What should be done in
> >> order to fix it? And if we can't fix them now is it going to be good
> >> idea re-try the git commands after user confirmation in case of
> >> failure?
> >>
> >> Now I am suck on 'make image'. The error is:
> >> . ./setup-env; exec bitbake "shr-lite-image"
> >> FATAL: Openembedded's config sanity checker detected a potential
> >> misconfiguration.
> >> Either fix the cause of this error or at your own risk disable the
> >> checker (see sanity.conf).
> >> Following is the list of potential problems / advisories:
> >>
> >> Please install following missing utilities: makeinfo
> >> Using dash as /bin/sh causes various subtle build problems, please use
> >> bash instead.
> >>
> >> make: *** [image] Error 1
> >>
> >> Looks like I have two problems.
> >> 1. dash is used instead of bash. I believe I know how to fix this.
> >> 2. I am missing 'makeinfo'. Ubuntu is suggesting to install 'texinfo'
> >> package. I'm going to do it, but my question should we update the
> >> SHR's wiki page to include 'texinfo' as dependency?
> >>
> >> Thank you,
> >> SAL-e
> >
> > On a minimal debian installation you need the following packages:
> > python2.6, git, subversion, cvs, make, gcc, g++, patch, help2man,
> > diffstat, texi2html, bzip2, gawk, tar, md5sum, zlib1g-dev
> >
> > And for some speedups: python-psyco
> > To set bash as default shell you have to run: dpkg-reconfigure dash
> >
> > I think the sanity check is doing a great job. But feel free to update
> > the wiki page.
> >
> > Greets
> > Thomas
>
> Thank you Thomas and Martin. I was able to overcome this an started
> the build process. Looks like it takes long time so I went to bed.
> Unfortunately on the morning I found that build process has stopped
> again at task# 427 (building eglibc_2.11.bb) From the screen messages
> I see that first problem is:
>
> mmap: Operation not permitted
>
> I have no idea what is happening now. Here is the full list of messages.
>
> NOTE: Running task 427 of 7502 (ID: 191,
> /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b
> b, do_package)
> NOTE: package eglibc-2.11-r9.4: task do_package: Started
> NOTE: preparing tree for binary locale generation
> mmap: Operation not permitted
> ERROR: TaskFailed event exception, aborting
> ERROR: Build of
> /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b
> b do_package failed
> NOTE: generating locale en_US (UTF-8)
> ERROR: Task 191
> (/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.
> bb, do_package) failed with 256
> ERROR:
> '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11
> .bb' failed
> NOTE: Task failed: localedef returned an error (command was
> PATH="/home/sal-e/shr-test/shr-unstable/tmp/staging/i686-linux/usr/bin/armv
> 4t-oe-linux-gnueabi:/home/sal-e/shr-test/shr-unstable/tmp/staging/i686-linu
> x/usr/bin/armv4t-oe-linux-gnueabi:/home/sal-e/shr-test/shr-unstable/tmp/sta
> ging/i686-linux/usr/sbin:/home/sal-e/shr-test/shr-unstable/tmp/staging/i686
> -linux/usr/bin:/home/sal-e/shr-test/shr-unstable/tmp/cross/armv4t//bin:/hom
> e/sal-e/shr-test/shr-unstable/tmp/staging/i686-linux/sbin:/home/sal-e/shr-t
> est/shr-unstable/tmp/staging/i686-linux/bin:/home/sal-e/shr-test/shr-unstab
> le/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
> :/usr/games"
> I18NPATH="/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnuea
> bi/eglibc-2.11-r9.4/locale-tree//usr/share/i18n" qemu-arm -s 1048576 -r
> 2.6.24 -L
> /home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/eglibc-2
> .11-r9.4/locale-tree -E
> LD_LIBRARY_PATH=/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux
> -gnueabi/eglibc-2.11-r9.4/locale-tree/lib
> /home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/eglibc-
> 2.11-r9.4/locale-tree/bin/localedef --force --old-style --no-archive
> --prefix=/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi
> /eglibc-2.11-r9.4/locale-tree --inputfile=/usr/share/i18n/locales/en_US
> --charmap=UTF-8 en_US).
> NOTE: package eglibc-2.11-r9.4: task do_package: Failed
> ERROR: TaskFailed event exception, aborting
> ERROR: Build of
> /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b
> b do_package failed
> ERROR: Task 191
> (/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.
> bb, do_package) failed with 256
> ERROR:
> '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11
> .bb' failed
> ERROR:
> '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11
> .bb' failed
> make: *** [image] Error 1
> sa...@ssadminv:~/shr-test/shr-unstable$
>
How does your conf/local.conf look like? I think you missed a dot in there...
_______________________________________________
Shr-devel mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-devel
