Am Donnerstag, 22. April 2010 20:16:55 schrieb SAL-e: > On Thu, Apr 22, 2010 at 1:07 AM, Thomas Zimmermann <[email protected]> wrote: > > Am Donnerstag 22 April 2010 09:55:18 schrieb SAL-e: > >> Thanks Thomas. > >> > >> I see. After rerunning the 'make setup' 3 times It was able to finish. > >> Why the git servers are slow or not reliable? What should be done in > >> order to fix it? And if we can't fix them now is it going to be good > >> idea re-try the git commands after user confirmation in case of > >> failure? > >> > >> Now I am suck on 'make image'. The error is: > >> . ./setup-env; exec bitbake "shr-lite-image" > >> FATAL: Openembedded's config sanity checker detected a potential > >> misconfiguration. > >> Either fix the cause of this error or at your own risk disable the > >> checker (see sanity.conf). > >> Following is the list of potential problems / advisories: > >> > >> Please install following missing utilities: makeinfo > >> Using dash as /bin/sh causes various subtle build problems, please use > >> bash instead. > >> > >> make: *** [image] Error 1 > >> > >> Looks like I have two problems. > >> 1. dash is used instead of bash. I believe I know how to fix this. > >> 2. I am missing 'makeinfo'. Ubuntu is suggesting to install 'texinfo' > >> package. I'm going to do it, but my question should we update the > >> SHR's wiki page to include 'texinfo' as dependency? > >> > >> Thank you, > >> SAL-e > > > > On a minimal debian installation you need the following packages: > > python2.6, git, subversion, cvs, make, gcc, g++, patch, help2man, > > diffstat, texi2html, bzip2, gawk, tar, md5sum, zlib1g-dev > > > > And for some speedups: python-psyco > > To set bash as default shell you have to run: dpkg-reconfigure dash > > > > I think the sanity check is doing a great job. But feel free to update > > the wiki page. > > > > Greets > > Thomas > > Thank you Thomas and Martin. I was able to overcome this an started > the build process. Looks like it takes long time so I went to bed. > Unfortunately on the morning I found that build process has stopped > again at task# 427 (building eglibc_2.11.bb) From the screen messages > I see that first problem is: > > mmap: Operation not permitted This happens when eglibc tries to create the locales by running qemu - and qemu failes because the kernel (by default) does not allow to mmap memory lower than a certain address. To tell the kernel to allow it do:
echo 0 > /proc/sys/vm/mmap_min_addr (as root) > > I have no idea what is happening now. Here is the full list of messages. > > NOTE: Running task 427 of 7502 (ID: 191, > /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b > b, do_package) > NOTE: package eglibc-2.11-r9.4: task do_package: Started > NOTE: preparing tree for binary locale generation > mmap: Operation not permitted > ERROR: TaskFailed event exception, aborting > ERROR: Build of > /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b > b do_package failed > NOTE: generating locale en_US (UTF-8) > ERROR: Task 191 > (/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11. > bb, do_package) failed with 256 > ERROR: > '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11 > .bb' failed > NOTE: Task failed: localedef returned an error (command was > PATH="/home/sal-e/shr-test/shr-unstable/tmp/staging/i686-linux/usr/bin/armv > 4t-oe-linux-gnueabi:/home/sal-e/shr-test/shr-unstable/tmp/staging/i686-linu > x/usr/bin/armv4t-oe-linux-gnueabi:/home/sal-e/shr-test/shr-unstable/tmp/sta > ging/i686-linux/usr/sbin:/home/sal-e/shr-test/shr-unstable/tmp/staging/i686 > -linux/usr/bin:/home/sal-e/shr-test/shr-unstable/tmp/cross/armv4t//bin:/hom > e/sal-e/shr-test/shr-unstable/tmp/staging/i686-linux/sbin:/home/sal-e/shr-t > est/shr-unstable/tmp/staging/i686-linux/bin:/home/sal-e/shr-test/shr-unstab > le/bitbake/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin > :/usr/games" > I18NPATH="/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnuea > bi/eglibc-2.11-r9.4/locale-tree//usr/share/i18n" qemu-arm -s 1048576 -r > 2.6.24 -L > /home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/eglibc-2 > .11-r9.4/locale-tree -E > LD_LIBRARY_PATH=/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux > -gnueabi/eglibc-2.11-r9.4/locale-tree/lib > /home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/eglibc- > 2.11-r9.4/locale-tree/bin/localedef --force --old-style --no-archive > --prefix=/home/sal-e/shr-test/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi > /eglibc-2.11-r9.4/locale-tree --inputfile=/usr/share/i18n/locales/en_US > --charmap=UTF-8 en_US). > NOTE: package eglibc-2.11-r9.4: task do_package: Failed > ERROR: TaskFailed event exception, aborting > ERROR: Build of > /home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11.b > b do_package failed > ERROR: Task 191 > (/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11. > bb, do_package) failed with 256 > ERROR: > '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11 > .bb' failed > ERROR: > '/home/sal-e/shr-test/shr-unstable/openembedded/recipes/eglibc/eglibc_2.11 > .bb' failed > make: *** [image] Error 1 > sa...@ssadminv:~/shr-test/shr-unstable$ > _______________________________________________ > Shr-devel mailing list > [email protected] > http://lists.shr-project.org/mailman/listinfo/shr-devel -- Klaus 'mrmoku' Kurzmann _______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
