On Friday 02 October 2009, Hans Zimmerman wrote:
> On Fri, 2 Oct 2009 05:19:28 +0200, Benjamin Schieder
> 
> <[email protected]> wrote:
> > On 29.09.2009 00:53:35, Al Johnson wrote:
> >> On Monday 28 September 2009, Benjamin Schieder wrote:
> >> > On 26.09.2009 12:39:44, Hans Zimmerman wrote:
> >> > > 1. Sometimes, upon incoming call there is a kernel panic. This is
> 
> not
> 
> >> > > with every incoming call.
> >> > > 2. Sometimes, when waking up from suspend, / is mounted ro and glamo
> >> > > errors arise. After reboot, the problem is gone..
> >> >
> >> > I don't have a kernel panic, but the SD mounted ro error and tons of
> >> > the
> >> > following in dmesg:
> >> >
> >> > [ 2449.110000] glamo-mci glamo-mci.0: Error after cmd: 0x8120
> >> > [ 2449.110000] mmcblk0: error -110 sending read/write command,
> 
> response
> 
> >> > 0x0, card status 0x400b00 [ 2449.110000] end_request: I/O error, dev
> >> > mmcblk0, sector 605665
> >>
> >> That looks like the error I had with a Kingston 4GB uSD, although it was
> >> a
> >> long while back so I could be mistaken. I tried changing the clock
> >> settings in
> >> the kernel parameters, but never got it to work reliably. Sometimes it
> >> would
> >> work for a few hours, and others it would fail during boot. I changed to
> >> a
> >> Sandisk 8GB card, and everything has been fine since. I keep meaning to
> >> try
> >> the Kingston again in case it works with a more recent kernel, but
> >> haven't got
> >> round to it.
> >
> > So it's probably a bad SD card. I currently have a Sandisk ultra mobile
> > 8GB card, maybe I'll try a different one soon then.
> >
> > Kind regards,
> >      Benjamin
> 
> Are there means to check whether a SD card is bad or whether it just does
> not work in a FreeRunner?
> Is it possible that a SD card simply works in certain system but won't work
> in a FreeRunner?

My 4GB Kingston is fine in my USB adaptor and the SD slot in my netbook. This 
suggests there's some problem either with the SD interface in the Glamo or the 
way we're using it. Changing the clock rate sorts it for some cards but not 
others. 
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user

Reply via email to