2009/11/29 encinalense <[email protected]>: > > Hey, everybody: > > Lots of things working in the 11/24 (now upgraded) shr-full, but -- some > will recall I had this problem before -- eth0 still isn't there. > > The slider works, now, both as a slider and in response to the mdbus > terminal command to turn wifi on or off. That's cool. And I even get the > little tray icon for enabled wifi on the SHR slider screen, which is a bit > irritating, given that eth0 (or wlan or anything besides usb0) isn't there. > If it helps, here's dmesg in response to the slider (and the term commands): > > [ 3025.515000] s3c2440-sdi s3c2440-sdi: powered down. > [ 3025.515000] s3c2440-sdi s3c2440-sdi: initialisation done. > [ 3025.540000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). > [ 3025.550000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3025.550000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3025.555000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3025.775000] s3c2440-sdi s3c2440-sdi: powered down. > [ 3722.515000] s3c2440-sdi s3c2440-sdi: powered down. > [ 3731.650000] s3c2440-sdi s3c2440-sdi: host detect has no irq available > [ 3731.650000] mapped channel 0 to 0 > [ 3731.650000] s3c2440-sdi s3c2440-sdi: powered down. > [ 3731.650000] s3c2440-sdi s3c2440-sdi: initialisation done. > [ 3731.720000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). > [ 3731.730000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3731.730000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3731.740000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: > 195kHz). > [ 3731.960000] s3c2440-sdi s3c2440-sdi: powered down. > > Is eth0 working for others?
Aren't there some messages about mmc1 and AR6000 in your log? Like this: Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.140000] mmc1: queuing CIS tuple 0x01 length 3 Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.305000] mmc1: queuing CIS tuple 0x1a length 5 Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.380000] mmc1: queuing CIS tuple 0x1b length 8 Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.480000] mmc1: queuing CIS tuple 0x80 length 1 Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.595000] mmc1: queuing CIS tuple 0x81 length 1 Nov 20 09:09:55 gta02v6 user.debug kernel: [21474563.600000] mmc1: queuing CIS tuple 0x82 length 1 Nov 20 09:09:55 gta02v6 user.info kernel: [21474563.665000] mmc1: new SDIO card at address 0001 Nov 20 09:09:55 gta02v6 user.warn kernel: [21474595.035000] AR6000 Reg Code = 0x40000060 Is there an ar6000 in the module list? _______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
