Hey, everybody: Lots of things working in the 11/24 (now upgraded) shr-full, but -- some will recall I had this problem before -- eth0 still isn't there.
The slider works, now, both as a slider and in response to the mdbus terminal command to turn wifi on or off. That's cool. And I even get the little tray icon for enabled wifi on the SHR slider screen, which is a bit irritating, given that eth0 (or wlan or anything besides usb0) isn't there. If it helps, here's dmesg in response to the slider (and the term commands): [ 3025.515000] s3c2440-sdi s3c2440-sdi: powered down. [ 3025.515000] s3c2440-sdi s3c2440-sdi: initialisation done. [ 3025.540000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 3025.550000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3025.550000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3025.555000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3025.775000] s3c2440-sdi s3c2440-sdi: powered down. [ 3722.515000] s3c2440-sdi s3c2440-sdi: powered down. [ 3731.650000] s3c2440-sdi s3c2440-sdi: host detect has no irq available [ 3731.650000] mapped channel 0 to 0 [ 3731.650000] s3c2440-sdi s3c2440-sdi: powered down. [ 3731.650000] s3c2440-sdi s3c2440-sdi: initialisation done. [ 3731.720000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 3731.730000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3731.730000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3731.740000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz). [ 3731.960000] s3c2440-sdi s3c2440-sdi: powered down. Is eth0 working for others? -Sean -- View this message in context: http://n2.nabble.com/eth0-shr-full-11-24-tp4081722p4081722.html Sent from the SHR Users discussions mailing list archive at Nabble.com. _______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
