Hi Joachim No date is shown, I guess the device is up but nothing more (no date, no coordinates) I've already removed all agps-data with no more success My position : lat : 48.7857175, long : 2.1864080
Is there any way via dbus to get the status of the gps receiver ? Thanks for your help Yann > 2009/12/5 Yann SLADEK <[email protected]>: > >> Hi there, >> >> since the release of shr unstable (and with latest upgrade from this >> morning), my gps is not working anymore (using navit, tangogps, >> openmoko-agps or reading /dev/ttySAC1) >> >> ... >> >> This output repeats continuously for about 15 times >> I already let my FR with gps on about 1 hour on during a survey in a car >> but nothing more >> > > I've done upgrade too just some minutes before, rebooted (there was a > new kernel in the upgrade), went 1.outside and started tangogps. I got > the gps time within some seconds, 3/9 satellites within a minute and > 5/9 after 2 minutes. > > Things you could check or do: > > - is the date and time somehow correct values before starting tangogps > (that is 5.12.2009 18:00 and not 1.1.1970 0:00)? > > - remove agps-data in Settings -> Position > > - get you some assist data from ublox to help it get going. I could > create a block for you to feed into /dev/ttySAC1 when you give me your > coordinates. > _______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
