Mine just started working again. :) I followed the timezone tip on the shr tweaks page, rebooted, deleted the agps info, and started it manually on the settings page. After a couple of minutes I had the 3D fix. http://trac.shr-project.org/trac/wiki/Tweaks#Timezone
Yann SLADEK wrote: > Hi there, > > no follow-up from now, I just tested yesterday with another gps module (one > working from a friend) but after 5 minutes, it doesn't work either. > I tried my module into his phone and it seems it wasn't working. > I need to run more tests, I didn't have enough time yesterday. > I noticed the wire between the connector and the gps module was flappy so I > maybe need to resolder it > Weird thing is sometimes, nothing come from /dev/ttySAC1 but I can get data > as mentioned below with the DEBUG mode of frameworkdlogd > > Regards, > > Yann > > ----- Mail Original ----- > De: "Vasco Névoa" <[email protected]> > À: "Yann SLADEK" <[email protected]> > Cc: [email protected] > Envoyé: Lundi 4 Janvier 2010 03:37:32 GMT +01:00 Amsterdam / Berlin / Berne / > Rome / Stockholm / Vienne > Objet: Re: [Shr-User] [SHR unstable] GPS not working > > Was there a follow-up on this? > My GPS also disappeared after my reflashing from SHR-U September to the last > version... > Tangogps says "no gps", and in SHR Settings there never is a fix or even > satellite list. > "hwclock" and "date" give pretty close times. > > Yann SLADEK wrote: > > Hi Joachim, > > sorry for the delay, the test was done on Sunday but I just post the > results now > > Yes my init is similar to yours : > 2009.12.08 18:49:01.950 frameworkd.resource INFO setting resource > status for GPS from disabled to enabling > 2009.12.08 18:49:01.962 ogpsd.gpsdevice INFO enabling > 2009.12.08 18:49:01.987 ogpsd WARNING (could not write > to '/sys/bus/platform/devices/neo1973-pm-gps.0/pwron': [Errno 2] No such > file or directory: '/sys/bus/platform/devices/neo1973-pm-gps.0/pwron') > 2009.12.08 18:49:02.585 frameworkd.resource INFO setting resource > status for GPS from enabling to enabled > > My module is activated (I can see it through a dbus call, via the > GetConnectionStatus method returning TRUE) but my antenna might be in cause > > When the gps module is activated, I can get through data collected (in > /dev/ttySAC1) as below : > > $GPTXT,01,01,02,u-blox ag - www.u-blox.com*50 $GPTXT,01,01,02,ANTARIS ATR062x > HW 80040001*26 > $GPTXT,01,01,02,ROM CORE 5.00 Jan 09 2006 12:00:00*76 > $GPTXT,01,01,02,LIC 1EBF-BD07-E83D-6BE1-0F7A*50 > $GPRMC,,V,,,,,,,,,,N*53 > $GPVTG,,,,,,,,,N*30 > $GPGGA,,,,,,0,00,99.99,,,,,,*48 > $GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30 > $GPGSV,1,1,00*79 > $GPGLL,,,,,,V,N*64 > $GPZDA,,,,,00,00*48 > > Then, using DEBUG mode of frameworkd.log, I got the following output > once a second, and that's all, no time sync, no gps fix : > > 2009.12.08 19:29:31.46 ogpsd DEBUG Got UBX packet of > type NAV-DOP: [{'GDOP': 9999, 'TDOP': 9999, 'VDOP': 9999, 'HDOP': 9999, > 'PDOP': 9999, 'ITOW': 35000, 'NDOP': 9999, 'EDOP': 9999}] > 2009.12.08 19:29:31.71 ogpsd DEBUG Got UBX packet of > type NAV-STATUS: [{'DiffS': 0, 'GPSfix': 0, 'Flags': 32, 'ITOW': 35000, > 'TTFF': 0, 'MSSS': 35038}] > 2009.12.08 19:29:31.120 ogpsd DEBUG Got UBX packet of > type NAV-VELNED: [{'SAcc': 99999904, 'GSpeed': 0, 'Speed': 0, 'Heading': > 0, 'ITOW': 35000, 'CAcc': 36000000, 'VEL_N': 0, 'VEL_E': 0, 'V > 2009.12.08 19:29:31.146 ogpsd DEBUG Got UBX packet of > type NAV-TIMEUTC: [{'Hour': 0, 'Nano': 0, 'Min': 0, 'Month': 1, 'Valid': > 0, 'Sec': 35, 'ITOW': 35000, 'Year': 1980, 'TAcc': 3335637760L > 2009.12.08 19:29:32.26 ogpsd DEBUG Got UBX packet of > type NAV-POSLLH: [{'LON': 0, 'HMSL': 487000, 'HEIGHT': 500000, 'ITOW': > 36000, 'LAT': 900000000, 'Vacc': 999998976, 'Hacc': 999998976}] > > What else can I do ? > > Thanks for your help > > Yann > > 2009/12/6 Yann SLADEK <[email protected]> : > > Hi, > > Today I tried to start gps with dbus. So first, I started the device > (there is 2 method for that one with Device.Start, one with > Resource.Enable) but both failed Better let's make sure that device is ok > before trying more with > mdbus. Can you do "grep -i gps /var/log/frameworkd.log" and paste the > lines after "launching internal subsystem ogpsd" - if this are more > than 100 lines, put them on pastebin.com or such. > > A successful init of the device should look similar like this: > > 2009.12.06 21:52:21.601 frameworkd.resource INFO setting resource > status for GPS from disabled to enabling > 2009.12.06 21:52:21.621 ogpsd.gpsdevice INFO enabling > 2009.12.06 21:52:21.689 ogpsd WARNING (could not write > to '/sys/bus/platform/devices/neo1973-pm-gps.0/pwron': [Errno 2] No > such file or directory: > '/sys/bus/platform/devices/neo1973-pm-gps.0/pwron') > 2009.12.06 21:52:22.283 frameworkd.resource INFO setting resource > status for GPS from enabling to enabled > _______________________________________________ > Shr-User mailing list [email protected] > http://lists.shr-project.org/mailman/listinfo/shr-user > _______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
