On Thu, Jan 7, 2010 at 11:29 PM, Davide Scaini <[email protected]> wrote:
>
>
> On Thu, Jan 7, 2010 at 11:01 PM, lars poulsen <[email protected]>
> wrote:
>>
>> On Thu, Jan 7, 2010 at 10:43 PM, Davide Scaini <[email protected]> wrote:
>> >
>> >
>> > On Thu, Jan 7, 2010 at 10:05 PM, lars poulsen <[email protected]>
>> > wrote:
>> >>
>> >> On Thu, Jan 7, 2010 at 7:42 PM, Davide Scaini <[email protected]>
>> >> wrote:
>> >> >
>> >> >
>> >> > On Thu, Jan 7, 2010 at 10:13 AM, lars poulsen
>> >> > <[email protected]>
>> >> > wrote:
>> >> >>
>> >> >> On Wed, Jan 6, 2010 at 6:10 PM, Davide Scaini <[email protected]>
>> >> >> wrote:
>> >> >> > On Wed, Jan 6, 2010 at 10:09 AM, lars poulsen
>> >> >> > <[email protected]>
>> >> >> > wrote:
>> >> >> >>
>> >> >> >> Hi list.
>> >> >> >>
>> >> >> >> Does anybody know of a VNC viewer that works with SHR?
>> >> >> >> I have a linux machine without monitor to control my music and i
>> >> >> >> would
>> >> >> >> love to use my freerunner to control this machine.
>> >> >> >>
>> >> >> >> regards,
>> >> >> >> _______________________________________________
>> >> >> >> Shr-User mailing list
>> >> >> >> [email protected]
>> >> >> >> http://lists.shr-project.org/mailman/listinfo/shr-user
>> >> >> >
>> >> >> > Maybe i'm stupid but there is vncviewer on shr!
>> >> >> > Is that what your're searching for?
>> >> >> > d
>> >> >> >
>> >> >>
>> >> >> Nope not you. It must be me.
>> >> >> Would you care to describe how you start it?
>> >> >>
>> >> >> regards,
>> >> >
>> >> > yes!
>> >> >
>> >> > server-side:
>> >> > I have an ubuntu with vncserver and x11vnc... and i use one or the
>> >> > other
>> >> > depending on what i need.
>> >> > Suppose my server has ip 192.168.0.200 (you have to set the password
>> >> > with
>> >> > vncpasswd)
>> >> >
>> >> > client-side (fr):
>> >> > vncviewer 192.168.0.200
>> >> > (if i run on the server x11vnc)
>> >> > or
>> >> > vncviewer 192.168.0.200:1
>> >> > (if i run plain vncserver on server; :1 is the number of the virtual
>> >> > display created when you run vncserver)
>> >> >
>> >> >
>> >> > HTH, if not, ask ;)
>> >> > d
>> >> >
>> >> Arghhh...
>> >> No path no nothing just vncviewer 192.168.0.200 in the terminal?
>> >> I just get: "vncviewer: not found"
>> >>
>> >> Thanks for you effort anyway...
>> >>
>> >> regards,
>> >
>> >
>> > Ah, you should first enstablish a working connection then vncviewer will
>> > work for sure.
>> > I use this script on my ubuntu:
>> >
>> > #bash sh!
>> > #run this script on you host
>> > sudo route add -host 192.168.0.202 dev eth1
>> > sudo iptables -t nat -A POSTROUTING -j MASQUERADE -s 192.168.0.0/24 -o
>> > wlan0
>> > sudo sysctl -w net.ipv4.ip_forward=1
>> > sudo ifconfig eth1 192.168.0.200 netmask 255.255.255.0
>> > ssh -X [email protected]
>> >
>> > this will connect with ssh to the fr.
>> > d
>> >
>>
>> Thanks but...
>> I can connect just fine with ssh both ways using wlan.
>> i can even run the music application with X forwarding.
>> But when i try to start the vncviewer application on the freerunner it
>> just doesn't recognize vncviewer as an application.
>> Thanks for all your help.
>>
>> regards,
>
> silly tip:
> opkg install vncviewer
>
> :P
>
Yes been there numerous times :-)
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
