On Fri, Jan 8, 2010 at 8:27 AM, lars poulsen <[email protected]> wrote:
> On Thu, Jan 7, 2010 at 11:29 PM, Davide Scaini <[email protected]> wrote:
>>
>>
>> On Thu, Jan 7, 2010 at 11:01 PM, lars poulsen <[email protected]>
>> wrote:
>>>
>>> On Thu, Jan 7, 2010 at 10:43 PM, Davide Scaini <[email protected]> wrote:
>>> >
>>> >
>>> > On Thu, Jan 7, 2010 at 10:05 PM, lars poulsen <[email protected]>
>>> > wrote:
>>> >>
>>> >> On Thu, Jan 7, 2010 at 7:42 PM, Davide Scaini <[email protected]>
>>> >> wrote:
>>> >> >
>>> >> >
>>> >> > On Thu, Jan 7, 2010 at 10:13 AM, lars poulsen
>>> >> > <[email protected]>
>>> >> > wrote:
>>> >> >>
>>> >> >> On Wed, Jan 6, 2010 at 6:10 PM, Davide Scaini <[email protected]>
>>> >> >> wrote:
>>> >> >> > On Wed, Jan 6, 2010 at 10:09 AM, lars poulsen
>>> >> >> > <[email protected]>
>>> >> >> > wrote:
>>> >> >> >>
>>> >> >> >> Hi list.
>>> >> >> >>
>>> >> >> >> Does anybody know of a VNC viewer that works with SHR?
>>> >> >> >> I have a linux machine without monitor to control my music and i
>>> >> >> >> would
>>> >> >> >> love to use my freerunner to control this machine.
>>> >> >> >>
>>> >> >> >> regards,
>>> >> >> >> _______________________________________________
>>> >> >> >> Shr-User mailing list
>>> >> >> >> [email protected]
>>> >> >> >> http://lists.shr-project.org/mailman/listinfo/shr-user
>>> >> >> >
>>> >> >> > Maybe i'm stupid but there is vncviewer on shr!
>>> >> >> > Is that what your're searching for?
>>> >> >> > d
>>> >> >> >
>>> >> >>
>>> >> >> Nope not you. It must be me.
>>> >> >> Would you care to describe how you start it?
>>> >> >>
>>> >> >> regards,
>>> >> >
>>> >> > yes!
>>> >> >
>>> >> > server-side:
>>> >> > I have an ubuntu with vncserver and x11vnc... and i use one or the
>>> >> > other
>>> >> > depending on what i need.
>>> >> > Suppose my server has ip 192.168.0.200 (you have to set the password
>>> >> > with
>>> >> > vncpasswd)
>>> >> >
>>> >> > client-side (fr):
>>> >> > vncviewer 192.168.0.200
>>> >> > (if i run on the server x11vnc)
>>> >> > or
>>> >> > vncviewer 192.168.0.200:1
>>> >> > (if i run plain vncserver on server; :1 is the number of the virtual
>>> >> > display created when you run vncserver)
>>> >> >
>>> >> >
>>> >> > HTH, if not, ask ;)
>>> >> > d
>>> >> >
>>> >> Arghhh...
>>> >> No path no nothing just vncviewer 192.168.0.200 in the terminal?
>>> >> I just get: "vncviewer: not found"
>>> >>
>>> >> Thanks for you effort anyway...
>>> >>
>>> >> regards,
>>> >
>>> >
>>> > Ah, you should first enstablish a working connection then vncviewer will
>>> > work for sure.
>>> > I use this script on my ubuntu:
>>> >
>>> > #bash sh!
>>> > #run this script on you host
>>> > sudo route add -host 192.168.0.202 dev eth1
>>> > sudo iptables -t nat -A POSTROUTING -j MASQUERADE -s 192.168.0.0/24 -o
>>> > wlan0
>>> > sudo sysctl -w net.ipv4.ip_forward=1
>>> > sudo ifconfig eth1 192.168.0.200 netmask 255.255.255.0
>>> > ssh -X [email protected]
>>> >
>>> > this will connect with ssh to the fr.
>>> > d
>>> >
>>>
>>> Thanks but...
>>> I can connect just fine with ssh both ways using wlan.
>>> i can even run the music application with X forwarding.
>>> But when i try to start the vncviewer application on the freerunner it
>>> just doesn't recognize vncviewer as an application.
>>> Thanks for all your help.
>>>
>>> regards,
>>
>> silly tip:
>> opkg install vncviewer
>>
>> :P
>>
> Yes been there numerous times :-)
>
I guess i do not know the path or what repository to add if it is not
in the main feed
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
