With latest SHR-u, I cannot access my uSD It worked perfectly with 2.6.29. I have SHR-u on NAND, and use uSD as storage
r...@om-gta02 ~ # dmesg |grep mmc
[ 2.370000] s3c-sdi s3c2440-sdi: mmc1 - using pio, sw SDIO IRQ
[ 2.985000] mmc0: new high speed SDHC card at address b368
[ 2.995000] mmcblk0: mmc0:b368 USD 14.9 GiB
[ 2.995000] mmcblk0: unknown partition table
[ 3.090000] mmc1: queuing CIS tuple 0x01 length 3
[ 3.105000] mmc1: queuing CIS tuple 0x1a length 5
[ 3.110000] mmc1: queuing CIS tuple 0x1b length 8
[ 3.125000] mmc1: queuing CIS tuple 0x80 length 1
[ 3.125000] mmc1: queuing CIS tuple 0x81 length 1
[ 3.135000] mmc1: queuing CIS tuple 0x82 length 1
[ 3.135000] mmc1: new SDIO card at address 0001
r...@om-gta02 ~ # fdisk -l /dev/mmcblk0
Disk /dev/mmcblk0: 16.1 GB, 16070475776 bytes
64 heads, 32 sectors/track, 15326 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 1 38 38896 83 Linux
/dev/mmcblk0p2 39 563 537600 83 Linux
/dev/mmcblk0p3 564 2414 1895424 83 Linux
/dev/mmcblk0p4 2415 15326 13221888 5 Extended
/dev/mmcblk0p5 2415 3041 642032 83 Linux
/dev/mmcblk0p6 3042 15082 12329968 83 Linux
/dev/mmcblk0p7 15083 15326 249840 82 Linux swap /
Solaris
r...@om-gta02 ~ # ls -la /dev/mmcbl*
brw------- 1 root root 179, 0 Jun 29 21:55 /dev/mmcblk0
As you can see, fdisk can access card and recognizes partition table, but no
devices are created, and data in card is inaccesible.
If I boot another distro from uSD (with 2.6.29 kernel) I can mount uSD
partitions ok
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Shr-User mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-user
