hmm...try plugging the cable modem into the hub uplink port, and dealing with
only 1 nic..
I'm not sure what you are asking here..in the previous post, you said the cable
modem was plugged into
the hub, in this one in the second NIC.
I'll be happy to send you my config if ya want it
Tom Carlile wrote:
> You lost me.
> This is what I have setup:
> I have a cable modem going to one NIC in my linux box.
> I have another NIC in my linux box that runs to a hub
> which supports my NT box and my roommate's machine.
> I masq the two win machines and see them on my eth0
> network and see the cable from eth1.
> Is this something like what you want?
>
> Bryan Tholen wrote:
> >
> > is there any way to ipmasq over a single devise using aliasing? before i got
> > a cable modem i easily ipmasq.ed from eth0 to ppp0. now i have a cable modem
> > plugged into a hub and the hub to my NIC and i want to ipmasq from the
> > eth0:0 alias on my NIC to the which has the inhouse ip address 192.168.0.1
> > to the eth0 device which is given an ip address via DHCP. anyone have any
> > tricks to get this to work?
> >
> > bryan tholen
> >
> > ---------------------------------------------------------------------------
> > Send administrative requests to [EMAIL PROTECTED]
>
> --
> Tom Carlile [EMAIL PROTECTED]
> -- randomly generated starwars quote:
> "Concentrate!"
> ---------------------------------------------------------------------------
> Send administrative requests to [EMAIL PROTECTED]
---------------------------------------------------------------------------
Send administrative requests to [EMAIL PROTECTED]
