sent from wrong sender-address, my fault ....
-------- Original-Nachricht -------- Betreff: Re: fx2 not enumerating Datum: Mon, 12 Nov 2012 19:46:53 +0100 Von: Jannis Achstetter An: [email protected] Am 12.11.2012 19:17, schrieb Jannis: > Am 21.10.2012 10:33, schrieb Bert Vermeulen: >> On 20/10/12 23:15, v01d wrote: >>> Hi, >>> I've been working on the Cypress FX2 chip (with the LCsoft board from >>> ebay) and I had a very hard time making it work (mainly, renumerate) >>> using any code that depended on fx2lib. >>> I've finally found some code based on gnuradio which didn't use fx2lib. >>> They developed their own base code and, provided you take some care when >>> compiling their code, it works perfectly. >>> I haven't been able to understand why fx2lib code does not work in the >>> same board. >> >> You should be aware that there's been a rash of counterfeits on the >> LCsoft boards on ebay -- got some bad ones myself. The chips are >> labelled correctly as the Cypress FX2LP, but are actually the older >> Cypress FX2. Among other things, it's a Full Speed-only (12Mb/s) USB >> chip. It also has 8K RAM instead of the FX2LP's 16K. However, fx2lafw >> doesn't run on it. > > Is there a definitve test for s.o. who never programmed an 8051/FX2? > I'm asking since I got a "LCSOFT"-board from eBay since two days and I > just can't get sigrok running. I'm on Gentoo here and using the ebuilds > from > https://bugs.gentoo.org/show_bug.cgi?id=426586 which means using current > git master. > [...] And what I forget: It does enumerate as High-Speed: [38210.250060] usb 2-2: new high-speed USB device number 49 using ehci_hcd [38210.401011] usb 2-2: New USB device found, idVendor=0925, idProduct=3881 [38210.401021] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 with jumper to EEPROM set. Without the jumper it has the vendor/product-IDs of the "eval board" (as it should). ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
