On Wed, 2016-04-13 at 09:22 +0200, Uwe Hermann wrote: > Hi, > > On Mon, Apr 11, 2016 at 08:44:28PM -0700, Brian Beattie wrote:
... > > sigrok-cli -l 5 --driver hantek-6xxx --samples 100 > > > > The first time it seems to complete successfully. If I run it > > again > > I have to disconnect the USB cable to be able to run the sigrok-cli > > command again. I've tried to force a reload of the firmware to > > hopefully reset every thing. According to the log it loaded the > > firmware but, given the timing I don't think it actually reset the > > 6022. > > Please attach a full "-l 5" log of the first run after USB attach, > and > another log of the second run as Benjamin Larsson mentioned. Maybe we > can see a problem in the logs. > > Also try different USB ports, USB cables, or PCs if possible please. > We've seen weird issues happening due to faulty USB ports and cables. > > > Uwe. The full log is pretty big, and I'll have to get it all set up again before I can post the log. Since I could not get sigrok to read the 6022 I went off an wrote some code from scratch. I can load firmware and read data from the 6022, so it does not seem like it's hardware. I find the sigrok gui interface a bit non-intuitive and I just want a basic Oscilloscope, so I may whip one up from scratch. -- "Actually I made up the term "object-oriented", and I can tell you I did not have C++ in mind." -- Alan Kay Brian Beattie<[email protected]> -- www.brian-beattie.com LFS12947 ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
