Given the generic nature of UART communication and the supported range
for the data width, "byte" may be a misleading name for the numeric
value that gets communicated in five to nine data bits. Rename the
"databyte" variable to "datavalue".
Signed-off-by: Gerhard Sittig <gerhard.sit...@gmx.net>
---
decoders/uart/pd.py | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/decoders/uart/pd.py b/decoders/uart/pd.py
index b78c617af978..be0e7c7f2d7e 100644
--- a/decoders/uart/pd.py
+++ b/decoders/uart/pd.py
@@ -166,7 +166,7 @@ def __init__(self):
self.frame_start = [-1, -1]
self.startbit = [-1, -1]
self.cur_data_bit = [0, 0]
- self.databyte = [0, 0]
+ self.datavalue = [0, 0]
self.paritybit = [-1, -1]
self.stopbit1 = [-1, -1]
self.startsample = [-1, -1]
@@ -230,7 +230,7 @@ def get_start_bit(self, rxtx, signal):
# TODO: Abort? Ignore rest of the frame?
self.cur_data_bit[rxtx] = 0
- self.databyte[rxtx] = 0
+ self.datavalue[rxtx] = 0
self.startsample[rxtx] = -1
self.state[rxtx] = 'GET DATA BITS'
@@ -249,12 +249,12 @@ def get_data_bits(self, rxtx, signal):
# Get the next data bit in LSB-first or MSB-first fashion.
if self.options['bit_order'] == 'lsb-first':
- self.databyte[rxtx] >>= 1
- self.databyte[rxtx] |= \
+ self.datavalue[rxtx] >>= 1
+ self.datavalue[rxtx] |= \
(signal << (self.options['num_data_bits'] - 1))
else:
- self.databyte[rxtx] <<= 1
- self.databyte[rxtx] |= (signal << 0)
+ self.datavalue[rxtx] <<= 1
+ self.datavalue[rxtx] |= (signal << 0)
self.putg([rxtx + 12, ['%d' % signal]])
@@ -270,9 +270,9 @@ def get_data_bits(self, rxtx, signal):
self.state[rxtx] = 'GET PARITY BIT'
self.putpx(rxtx, ['DATA', rxtx,
- (self.databyte[rxtx], self.databits[rxtx])])
+ (self.datavalue[rxtx], self.databits[rxtx])])
- b, f = self.databyte[rxtx], self.options['format']
+ b, f = self.datavalue[rxtx], self.options['format']
if f == 'ascii':
c = chr(b) if b in range(30, 126 + 1) else '[%02X]' % b
self.putx(rxtx, [rxtx, [c]])
@@ -312,7 +312,7 @@ def get_parity_bit(self, rxtx, signal):
self.state[rxtx] = 'GET STOP BITS'
if parity_ok(self.options['parity_type'], self.paritybit[rxtx],
- self.databyte[rxtx], self.options['num_data_bits']):
+ self.datavalue[rxtx], self.options['num_data_bits']):
self.putp(['PARITYBIT', rxtx, self.paritybit[rxtx]])
self.putg([rxtx + 4, ['Parity bit', 'Parity', 'P']])
else:
--
1.9.1
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
sigrok-devel mailing list
sigrok-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
