Thank you for your help.
I rebuilt libsigrok with switches
./configure --enable-fx2lafw
make
sudo make install
Unfortunately this did not change anything. I still get the error.
Do I have to remove the old stuff first?
I quite never understood how to remove self-compiled software.
-----Ursprüngliche Nachricht-----
Von: Paul Fertser [mailto:[email protected]]
Gesendet: Dienstag, 20. Dezember 2016 08:38
An: Ulrich, Sebastian (EM LP PEM PMA)
Cc: [email protected]
Betreff: Re: [sigrok-devel] sigrok-cli error driver fx2lafw not found
On Tue, Dec 20, 2016 at 07:22:32AM +0000, Ulrich, Sebastian wrote:
> > Is that sigrok self-compiled from the sources?
>
> Yes it is. I did it as described on the homepage.
> I cloned the git repositories and compiled and installed them.
> (libserialport, libsigrok, libsigrokdecode, sigrok-cli,
> sigrok-firmware)
You need to rebuild libsigrok with appropriate switches. Either do not use
--disable-all-drivers (as --enable-all-drivers should be the
default) or add --enable-fx2lafw (and the others you might need) to ./configure
invocation.
> > That's firmware that's run on the LA itself, it's not the driver the error
> > talks about.
>
> Does this firmware has to be transferred to the logic analyzer?
It'll get uploaded automatically by the driver when you first try to use it.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:[email protected]
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/intel
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
