Hello, After creating an AppImages of sigrok-cli I have done some tests on a serial port (uart) of my GPS receiver.
I noticed that the decoder -B uart draws twice. jo@debian: ~/appimagetool_dl$ ./sigrok-cli-x86_64.AppImage --driver saleae-logic16 --config sample rate = 5M --samples 1000000 --channels 0 = TX --triggers TX = r --protocol-decoders uart: baudrate = 9600: num_data_bits = 8: parity_type = none: parity_check = no -B uart rr bbjj 4455..55,, MM ,,,, ** 66BB $$ GGPPGGSSAA ,, AA ,, 33,, 1122, 1155, 3322, 1133, 2244, 1177, 1199, 1100, 0011 ,, 11..4466 ,,,,,,,, 00..8855, 11..1199 ** 0099 $$ GGPPGGSSVV ,, 33,, 11,, 1122, 0011, 0055, 001111, 2266, 0066, 0033, 110099, 2266, 1100, 1166, 228877, 2255 ,, 1122, 5511, 223366, 3322 ** 77CC $$ GGPPGGSSVV ,, 33,, 22,, 1122,, 1133,, 1111,, 116600,, 2244, 1155, 3311, 118877, 2255, 1177 ,, Countered with jo@debian: ~/appimagetool_dl$ gpscat -s 9600 /dev/ttyUSB0 \ X00 \ x00 \ x00 \ x00 \ x00 \ x08b \ x82 \ xca \ x8ab \ X9a \ x9aR \ xba "5 $ GPGSV,3,3,12,24,83,273,41,25,11,241,08,28,01,058,22,32,15,320,27 * 7B $ GPGLL, 5225.38895, N, 01029.34598, E, 134200.00, A, A * 6B $ GPRMC, 134201.00, A, 5225.38896, N, 01029.34601, E, 0058, 110318 ,,, A * 74 $ GPVTG ,, T ,, M, 0058, N, 0108, K, A * 27 $ GPGGA, 134201.00,5225.38896, N, 01029.34601, E, 1,09,1.11,72.6, M 45.5, M ,, * 60 $ GPGSA, A, 3,12,15,32,13,24,17,19,10,01 ,,,, 2.03,1.11,1.71 * 09 $ GPGSV, 3,1,12,01,05,012,25,06,02,110,30,10,17,288,22,12,50,235,33 * 78 $ GPGSV, 3,2,12,13,12,160,11,15,33,187,11,17,40,062,28,19,48,091,31 * 75 $ GPGSV, 3,3,12,24,83,273,40,25,11,241,08,28,01,058,22,32,15,320,26 * 7B $ GPGLL, 5225.38896, N, 01029.34601, E, 134201.00, A, A * 6A $ GPRMC, 134202.00, A, 5225.38900, N, 01029.34597, E, 0080, 110318 ,,, A * 70 $ GPVTG ,, T ,, M, 0080, N, 0148, K, A * 26 $ GPGGA, 134202.00,5225.38900, N, 01029.34597, E, 1,08,1.10,72.6, M 45.5, M ,, * 61 $ GPGSA, A, 3,12,15,32,24,17,19,10,01 ,,,,, 2.03,1.10,1.71 * 0A $ GPGSV, 3,1,12,01,05,012,25,06,02,110,30,10,17,288,21,12,50,235,33 * 7B $ GPGSV, 3,2,12,13,12,160,09,15,33,187,16,17,40,062,27,19,48,091,31 * 74 $ GPGSV, 3,3,12,24,83,273,40,25,11,241,07,28,01,058,22,32,15,320,26 * 74 $ GPGLL, 5225.38900, N, 01029.34597, E, 134202.00, A, A * 6B $ GPRMC, 134203.00, A, 5225.38901, N, 01029.34598, E, 0118, 110318 ,,, A * 7F $ GPVTG ,, T ,, M, 0118, N, 0218, K, A * 20 $ GPGGA, 134203.00,5225.38901, N, 01029.34598, E, 1,08,1.10,72.6, M 45.5, M ,, * 6E $ GPGSA, A, 3,12,15,32,24,17,19,10,01 ,,,,, 2.03,1.10,1.71 * 0A $ GPGSV, 3,1,12,01,05,012,25,06,02,110,30,10,17,288,20,12,50,235,33 * 7A $ GPGSV, 3,2,12,13,12,160,10,15,33,187,17,17,40,062,27,19,48,091,31 * 7D Comparison: uart: $$ GGPPGGSSAA ,, AA ,, 33,, 1122, 1155, 3322, 1133, 2244, 1177, 1199, 1100, 0011 ,, 11..4466 ,,,,,,,, 00..8855, 11..1199 ** 0099 gpscat: $ GPGSA, A, 3,12,15,32,13,24,17,19,10,01 ,,,, 2.03,1.11,1.71 * 09 My sigrok-cli-x86_64.AppImage https://github.com/jolinux/AppImage-Sigrok-Cli/releases thanks Jo ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
